Jenn-Air JMC8100ADB manual Trouble, Possible Cause, Possible Remedy, ERRORERROR1,2

TROUBLE	POSSIBLE CAUSE	POSSIBLE REMEDY
ERROR(ERROR1,2)	* ERROR l: lf door is opened	•	Press STOP/CLEAR and
message appears in	before time countdown		restart using Timed
the display window,	appears in the display.		Cooking on page 14.
	'. ERROR 2: If the oven has	•	Press STOP/CLEAR and
	not been plugged into a		wait for 5 minutes to

power supply for more than 5 minutes when you start

restart from step 1 of Auto Sensor

		Sensor Cooking.			Microwaving		on
					page 16.
Why couldn't l get	•	The food was	not covered	•	See pages16		-17 and 24
good results even		properly.			- 25 for instructions on
though I cooked food					how to prepare food.
using Auto Sensor	•	STOP/CLEAR was pressed		•	Do not open the door or
Cooking?		or the door was opened			press STOP/CLEAR
		while the sensor was			while display		shows
		programming	the right		SENSOR COOKING.
		cooking time	and power
		level.
	•	The food being cooked was ° Use Timed Cooking.
		not suitable for Auto			(see page 14)
		Sensor Microwaving
	•	There may have been too		•	When cooking more
		much or not enough food to			than	2 Ibs (900 g) or less
		ensure proper results from			than	4 oz. (115 g) of
		Auto Sensor	Microwaving.		food,	use Timed
					Cooking on page 14.

32