Jenn-Air W10430955A installation instructions Product Dimensions Cabinet Dimensions

Product Dimensions Cabinet Dimensions

B*

D

A

F

E**

C

Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height.

A

BC

H D

EI

I

F

G

A. 30³⁄₄" (78.1 cm)	D. 29⁷⁄₈" (75.9 cm)
B. 35³⁄₄" (90.8 cm) height to underside	E. 29¹⁄₁₆" (73.8 cm) from
of cooktop edge with leveling legs	handle to standoff at back
screwed all the way in*	of range**
C. Model/serial number plate (located	F. 23½" (59.7 cm)
on the right-hand side of the	countertop notch to rear
bottom oven frame)	of cooktop

*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.

**When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop; front of oven door protrudes 2¹⁄₂" (6.4 cm) beyond 24" (61.0 cm) base cabinet.

A. 13" (33.0 cm) upper cabinet depth

B. 30" (76.2 cm) min. opening width

C. For minimum clearance to the top of the cooktop,

see NOTE*.

D. 23¹⁄₄" (59.1 cm) opening depth

E. 30" (76.2 cm) min. opening width

F. Junction box - 5.5" (14.0 cm) min. from either cabinet, 10" (25.4 cm) max. from floor Outlet must be flush. Nothing located in shaded area can extend more than 2" (5.1 cm) from wall or range will not slide all the way back.

G. Cabinet door or hinge should not extend into cutout.

H. 18" (45.7 cm)

I. 3" (7.6 cm) min. clearance from both sides of the range to the side wall or other combustible material.

NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.

4