Jenn-Air WM2780, W2780 I ILli ..mmtill ioq=s, I I,0.LILt =, Touch Bake Pad or Convection Bake Pad

After 3 seconds the Display will show probe temperature or 095 °, whichever is higher. Indicator Words CONV and BAKE will flash.

I I,0.LILt = .,,

6.Touch Bake Pad or Convection Bake Pad.

Indicator Words BAKE or CONV BAKE will flash and Display will show 3 dashes.

7.Turn Set Dial until desired oven temperature appears in the Display.

Ifthe Set Dial is turned one click, 325°will be shown. The Set Dial can beturned in either direction until the desired temperature appears in the Display.

EXAMPLE: Ifat 10o'clockyou set the oven for a probe temperature and to convect bake at 350°, after 3 seconds the Display will show:

I ILli ..mmtill ioq=s, ;,°

When selected temperature has been reached, the oven will shut off and the signal will beep 3 times. Ifthe probe is not removed, the actual probe temperature will be in the Display. The temperature will flash and the signal will beep continuously until the probe is removed.

NOTE: Once selected internal temperature has been reached, unplug the probe from the oven and removefood immediately to prevent overcooking. Hold plug with

potholder.

IMPORTANT: The probe must be unplugged and removed from oven when it is not

being used. If probe is left plugged in oven and Probe feature is not programmed, the signal will beep and temperature will flash continuously. Be sure metal cover is over receptacle when Probe feature is not being used.

To recall oven temperature selected: Touch the appropriate Bake Pad. The

temperature will be displayed briefly before returning to probe temperature.

To change oven temperature set: Touch appropriate pad and turn Set Dial to new desiredtemperature.

To use Probe feature to start at future time and shut off automatically:

IMPORTANT: Both estimated cook time and stop time must be set or oven will start immediately. Therefore, follow all nine steps.

1.Insert probe.

2.Touch Probe Pad.

3.Turn Set Dial to desired temperature.

4.Touch Bake Pad or Convection Bake Pad.

5.Turn Set Dial to desired temperature.

6. Touch CookTime Pad.

Indicator Words OVEN and TIME will flash and Display will show "0 HR :00". NOTE WW2780 OWNERS: The appropriate number (1-upper oven; 2-lower oven) will also flash.

7.Turn Set Dial to enter cooking hours in5 minute increments. Hours are to left of colon and minute to right of colon.

(Allowable range is 5 minutes to 11 hours and 50 minutes.)

23