Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all the packaging for re-use in case the machine is to be transported again.

Set the machine upright and remove the two remaining bolts from the back.

Pull out the three plastic spacers from the holes into which the bolts were fitted.

Plug the open holes with the plugs supplied with the instruction booklet.

Using a spanner unscrew and remove the rear right bolt.

Lay the machine gently on its back, making sure that the hoses are not squashed.

P0255

P0256

Positioning

P0020

Remove the polystyrene base and take off the bottom panel by unscrewing the central screw.

Carefully slide out the right polythene bag.

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units.

P0457

P0015

Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Your new washer-dryer has been designed to be permanently plumbed in to your home’s water supply and drainage system. However, if this is not possible, it may be connected to a suitable existing tap with the drain hose discharging into a sink.

Repeat the operation for the left and central polythene bags.

Re-fit the bottom panel using the 4 screws supplied with the door hinges (in the plastic bag) and the previously removed screw.

The appliance has an inlet hose, with female 3/4” BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or

P0016

P0453

qualified plumber.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

7

Page 6 Page 8
Page 7
Image 7
John Lewis JLBIWD 1400 instruction manual Unpacking, Installation on a Suspended Floor, Qualified plumber
Page 6 Page 8

JLBIWD 1400 specifications

The John Lewis JLBIWD 1400 is a highly efficient and versatile washing machine that meets the demands of modern households. This integrated washer dryer combines practicality with advanced technology, making it a popular choice among consumers seeking a reliable laundry solution.

One of the standout features of the JLBIWD 1400 is its impressive capacity. With a washing load of up to 8 kg and a drying load of 5 kg, this machine is designed to handle large volumes of laundry, making it suitable for families or those with busy lifestyles. Its 1400rpm spin speed ensures that clothes come out damp but not soaking wet, reducing drying time significantly.

The JLBIWD 1400 incorporates a variety of washing programs tailored for different fabric types and user preferences. From gentle cycles for delicate items to powerful settings for heavily soiled clothing, the machine offers flexibility to cater to individual needs. The quick wash option is an added convenience, allowing users to clean small loads in as little as 15 minutes.

Another key characteristic of the John Lewis JLBIWD 1400 is its energy efficiency. With an energy rating of A, this washer dryer helps reduce electricity bills while minimizing environmental impact. The machine is designed to use water and energy judiciously without compromising performance.

In terms of technology, the JLBIWD 1400 is equipped with an intuitive control panel that allows users to select programs easily. The digital display provides clear feedback on the selected washing cycle and remaining time, enhancing usability. Additionally, the delay start feature offers the convenience of scheduling laundry for a more suitable time, such as during off-peak energy hours.

Safety features are also paramount, and this model includes a child lock function to prevent accidental operation. The machine is built with robust materials designed for longevity and comes with a warranty, providing peace of mind to consumers.

The John Lewis JLBIWD 1400 combines features, technology, and efficiency in one sleek package. With its large capacity, diverse washing programs, and user-friendly interface, it stands out as a reliable appliance that simplifies the laundry process for households everywhere.
Top Page Image Contents