Door lock light (11)

The light Door lock shows if you can open the door:

light on: the door cannot be opened. The machine in working or has stopped with water left in the tub.

light off: the door can be opened. The programme is finished or the water has been emptied out.

Delay Start (12)

The programme can be delayed from 30 min

-60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.

Display (4)

4.10

4.9

4.8

4.7

4.1

4.2

4.3

4.4

4.5

4.6

4.1Temperature indicator: «Cold» corresponds to cold washing.

4.2Spin speed indicator - «Rinse hold» and «Quiet» options

The Spin Exclusion is indicated by a «0». This option eliminates all the spin phases and increases the number of rinses.

Rinse hold : when you choose this function, the machine will not drain the water of the last rinse, so as not to crease the laundry. The selected option will be displayed.

Quiet : when you choose this function, the machine will not drain the water of the last rinse, so as not to crease the laundry. As all spinning phases are cancelled, this washing

cycle is very quiet and it can be selected at night or in times with a more economical power rate. On some programmes the rinses will be performed with more water.

If the «Rinse Hold» or «Quiet» option has been selected the «Door lock» light is on, the «Start/Pause» button light goes out and the display shows a flashing «0». The door cannot be opened because the water must be drained. To empty out water read the paragraph «At the end of the programme».

4.3Available options: Easy iron,

Intensive, Stain and Prewash . When an option is enabled the rectangle around that option illuminates.

11

Page 11
Image 11
John Lewis JLWM 1410 instruction manual Door lock light, Delay Start, Display, Available options Easy iron