9.Put the cap back on the emergency emptying hose and place the latter back in its seat.

10.Replace the filter into the pump by inserting it correctly into the special guides. Screw the pump cover firmly by turning it clockwise.

11. Close the pump door.

Warning!

When the appliance is in use and depending on the programme selected there can be hot water in the pump.

Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When refitting the pump cover, ensure it is securely re-tightened so as to stop leaks and young children being able to remove it.

Cleaning the water inlet filters

Warning! If the appliance doesn't fill or it is taking longer to fill with water, check if the water inlet filters are blocked.

1.Turn off the water tap.

2.Unscrew the water inlet hose.

3.Clean the filter using a hard bristle brush.

4.Screw the hose back onto the tap.

5.Unscrew the hose from the machine. Keep a rug nearby because some water may flow.

28

Page 28
Image 28
John Lewis JLWM 1410 instruction manual Cleaning the water inlet filters