Select the desired temperature and spin speed
Press button 5 button repeatedly in order to set the temperature and button 6to change the spin speed from the one proposed by the washing machine.
The button 6 allows you also to choose «No Spin» («0»), «Rinse Hold » or «Quiet» function.
Select the desired options
Press buttons 7and 8 to select the available options. Depending on the programme, different options can be selected together. These must be selected after choosing the desired programme and before pressing the button 10. If an option which is not compatible with the set wash programme is selected, the red Start/Pause light flashes 3 times and the message Err is displayed for a few seconds.
When the option is set, it will appear in the relevant rectangle on the display or the relevant symbol icon will be displayed.
Select the delay start
Before you start the programme, press button 12 repeatedly to select the desired delay. The set delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again. The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours.
Selecting the delayed start
You must select this option after you have set the programme and before you press the «Start/Pause» button.
•Select the programme and the required options.
•Select the delay start.
•Press button 10: the machine starts its hourly count down. The programme will start after the selected delay has expired.
Opening the door throughout the delay time
During the period until the delayed start, the door can be opened and laundry added:
•Press the button 10
•Put laundry in and close the door
•Press the button 10 again
The programme will start after the countdown has expired.
Cancelling the delayed start You can cancel the delay time at any moment, before you press the «Start/ Pause» button.
•Press «Start/Pause» button.
•Press «Delay start» button once until the symbol «0’» is displayed.
•Press button 10 again.
Changing the Delay Start Timer
It is only possible to change the Delay Start by switching off the appliance: press button 2 before it takes effect and selecting again the programme.
Start the programme
To start the selected programme, press the button 10 ; the green pilot light stops flashing. If you have selected a delay time, the countdown will begin and will be shown on the display.
To interrupt a programme which is running, press button 10: the green pilot light starts to flash. To restart the programme from the point at which it was interrupted, press the button 10 again. If an incorrect option is selected, the red pilot light of button 10
15
