First use

• Ensure that the electrical and water connections comply with the installation instructions.

Remove the polystyrene block and any material from the drum.

Before the first wash, run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the machine.

Personalisation

Acoustic signals

The machine is provided with an acoustic device, which sounds in the following cases:

at the end of a washing cycle

if there is a fault

You can deactivate the acoustic signal (except if there is a fault) by pressing the buttons 7 and the 8 simultaneously for about 5 seconds. By pressing these buttons again the acoustic signal is reactivated.

Child lock

This function works in two different ways:

If enabled before the «Start/Pause» button is pressed, it prevents the machine from being started.

If enabled after pressing the «Start/ Pause» button, it prevents any changes being made to the programmes or

options selected

To enable or disable this function, press the buttons 5 and 6 simultaneously for approximately 6 seconds until the icon appears on or disappears from the display.

13

Page 13
Image 13
John Lewis JLWM 1410 instruction manual First use, Personalisation, Acoustic signals, Child lock