Technical Data, Technical data, FC 2145 S | Jonsered CC 2145

TECHNICAL DATA

Technical data

		BC 2145	FC 2145	FC 2145 S	FC 2145 W
	Engine
	Cylinder displacement, cu.in/cm3	2,75/45	2,75/45	2,62/43	2,62/43
	Cylinder bore, inch/mm	1,65/42	1,65/42	1,61/41	1,61/41
	Stroke, inch/mm	1,26/32	1,26/32	1,26/32	1,26/32
	Idle speed, rpm	2800	2800	2800	2800
	Recommended max. speed, rpm	12500	13500	13500	13500
	Speed of output shaft, rpm	9000	10500	10500	10500
	Max. engine output, acc. to ISO 8893, kW/ rpm	2,0/9000	2,0/9000	2,1/9600	2,1/9600
	Catalytic converter mufﬂer	Yes	No	Yes	Yes
	Speed-regulated ignition system	Yes	Yes	Yes	Yes
	Ignition system
	Manufacturer/type of ignition system	SEM AM	SEM AM	SEM AM	SEM AM
	Spark plug	Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y
	Electrode gap, inch/mm	0,02/0,5	0,02/0,5	0,02/0,5	0,02/0,5
	Fuel and lubrication system
	Manufacturer/type of carburetor	Zama C1Q	Zama C1Q	Zama C1Q	Zama C1Q
	Fuel tank capacity, US pint/litre	1,9/0,9	1,9/0,9	1,9/0,9	1,9/0,9
	Weight
	Weight without fuel, cutting attachment and	18,0/8,2	18,5/8,4	18,3/8,3	18,3/8,3
	guard, Lbs/kg	18,0/8,2	18,5/8,4	18,3/8,3	18,3/8,3
	guard, Lbs/kg
	Sound levels
	(see note 1)
	Equivalent sound pressure level at the user′s
	ear, measured according to ANSI B175.3-1997, 97/103		98/103	99/104	99/104
	dB(A), min/max:
	Vibration levels
	Vibration levels at handles, measured according
	to ANSI B175.3-1997, m/s2
	At idle, left/right handles, min.:	3,8/4,0	3,8/4,2	3,3/3,5	3,3/3,5
	At idle, left/right handles, max.:	3,8/4,0	3,8/4,2	3,3/3,5	3,3/3,5
	At max. speed, left/right handles, min.:	1,7/1,9	1,8/2,3	1,5/2,1	1,5/2,1
	At max. speed, left/right handles, max.:	2,1/2,2	2,4/2,5	1,7/2,7	1,7/2,7

Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various

working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment ﬁtted. The table indicates the highest and lowest values.

English – 33

Image 33

Jonsered CC 2145 manual Technical Data, Technical data, FC 2145 S, FC 2145 W, Engine, Ignition system, Weight, Sound levels

Contents

Operator’s manual EPA Symbols KEY TO SYMBOLS Contents CONTENTSNote the following before starting KEY TO SYMBOLS Dear customer INTRODUCTION What is what on the clearing saw? BC WHAT IS WHAT? What is what on the clearing saw? FC 2145, FC 2145 S, FC 2145 W Decompression valve FC 2145 S, FC 2145 W6 - English What is what on the clearing saw? CC Personal protective equipment GENERAL SAFETY PRECAUTIONSWARNING! Listen out for warning signals or WARNING! The ignition system of this Machine′s safety equipment WARNING! Never use a machine with faultyA BA B Vibration damping system Cutting attachment guardQuick release Mufﬂer Locking screw Locking nutWARNING! Mufﬂers ﬁtted with catalytic WARNING! The inside of the mufﬂer contain WARNING! Using an incorrect cutting Cutting equipmentGeneral rules WARNING! Always stop the engine before Trimmer head Sharpening the saw blade Assembling the handlebar and throttle FC 2145, FC 2145 S, FC 2145 W ASSEMBLYTransport position, handlebar Assembling the handlebar and throttle BC 2145, CC Assembling the cutting equipment L M C AWARNING! When ﬁtting the cutting N E F P BA C Fitting the trimmer guard and trimmer head Trimmy SII Fitting the blade guard and saw bladeL M C A H P B C Fitting other guards and cutting attachments Adjusting the harness and clearing sawStandard harness WARNING! When using a clearing saw it 2 Grass clearing Vector harness FUEL HANDLING Fuel safetyFuel WARNING! Take care when handling fuel WARNING! Taking the following precautions will lessen the risk of ﬁre FuelingWARNING! The catalytic converter mufﬂer Do not smoke or place hot objects near fuel Check before starting STARTING AND STOPPINGStarting and stopping WARNING! The complete clutch cover and Starting WARNING! When the engine is started withStopping Heated handles FC 2145 W WORKING TECHNIQUES General working instructionsWARNING! Neither the operator of the WARNING! Watch out for thrown objects Working methodsWARNING! Sometimes branches or grass WARNING! Machines ﬁtted with saw blades Brush cutting with a saw blade Grass clearing using a grass blade Clearing TrimmingCutting Sweeping MAINTENANCE CarburetorWARNING! If the idle speed cannot be Setting procedure without a load Blade can be used Setting procedure with a load Trimmer head should be usedFC 2145, FC 2145 S, FC 2145 W Speed control at 13500 rpm Cooling system MufﬂerAir ﬁlter Proceed as follows Drive shaft Bevel gearSpark plug Cleaning the air ﬁlter Temperature 5C 41F or colder Winter use Maintenance Maintenance schedulemaintenance Daily Technical data TECHNICAL DATAWeight FC 2145 S Weight Type Approved accessoriesCutting attachment guard, Art. no FC 2145, FC 2145 S, FC 2145 W YOUR WARRANTY RIGHTS AND OBLIGATIONS FEDERAL EMISSION CONTROL WARRANTY STATEMENT Poly Trim 6 Nm20mm 095-.130 Trimmy SII7,0 m ~ 3,5 mPage 1,1 Kw Auto1,1 Kw 2,7-3,3 mm 10 m Tap n’Go 45 Spin10 cm 4,3 m 2,7-3,3 mm ´z+Rvy¶5s¨ ´z+Rvy¶5s¨ Page 1150868-95 ´z+Rvy¶5s¨ ´z+Rvy¶5s¨