Alcove, Height above the top of the stove = 40 1015mm

NOTICE

Accessories for woodstoves for clearance reduction have been developed by many manufacturers. If not following the methods of the installation codes, be sure that any accessory you choose has been tested by an independent laboratory and carries the laboratory’s testing mark. Make sure to follow all of the manufacturer’s instructions.

Always contact your local building inspector or fire officials about restriction and requirements in your area. Reminder, it is the local officials who have final authority in the installations approval.

ALCOVE

The F 3 CB is approved for installations in an unprotected and protected ALCOVE provided the following guidelines are followed: Stoves must be positioned as shown in figures 13 or 14.

MINIMUM PROTECTED ALCOVE:

Assumes-

top exit, double wall pipe, and stove’s rear heatshield.

Minimum alcove width = 35” (890mm) Maximum alcove depth = 24” (610mm)

Height above the top of the stove = 40” (1015mm)

In a PROTECTED alcove installation both side walls and rear wall must be protected per NFPA 211 or CAN/CSA-B365. The wall protection must be elevated 1” from the floor and at least 1” off the combustible wall to allow for an air-flow.

Alcove floor protection must be: a UL/ULC or WHI listed hearth board OR a non cmbustible material with a minimum R value of 1.1.

MINIMUM UNPROTECTED ALCOVE:

Assumes-

top exit, single wall pipe, and stove’s rear heatshield.

Minimum alcove width = 71” (1805mm) Maximum alcove depth = 40” (1015mm) Height above the top of the stove = 68” (1730mm)

6”

150mm

10”

255mm

6”

150mm

max. depth 24” (610mm)

35” min. 890mm

FIGURE 14

24”

610mm

71” min. (1805mm)

25”

635mm

24”

610mm

			FIGURE 13

	max. depth
	40” (1015mm)
	40” (1015mm)

Top vent/vertical- assumes the connector pipe is exiting off the top of the stove and traveling vertically. If top vented to any horizontal runs –the stove’s position is dictated by the connector pipe clearances.

REAR EXITALCOVE INSTALLATIONS:

Unprotected alcove: assumes single wall pipe and stove’s rear heatshield.

Minimum alcove width = 71” (1805 mm) Maximum alcove depth = 40” (1015mm)

Alcove ceiling above top of stove = 68” (1730mm)

Protected alcove: assumes double wall pipe and stove’s rear heatshield.

Minimum alcove width = 35” (890mm) Maximum alcove depth = 30” (760mm)

Alcove ceiling above top of stove = 40” (1015mm)

F 3 specifications

The Jotul F 3 is a classic wood stove that embodies the perfect blend of traditional design and modern engineering. Renowned for its efficiency and durability, this model has become a favorite among homeowners looking for an effective heating solution with aesthetic appeal.

One of the standout features of the Jotul F 3 is its efficient combustion system. This stove employs a unique primary and secondary combustion system that allows for a cleaner burn, producing minimal emissions. This technology not only enhances the stove's efficiency but also contributes to a reduced environmental footprint, making it an excellent choice for eco-conscious consumers.

In terms of design, the Jotul F 3 is crafted from cast iron, a material known for its longevity and heat retention properties. This construction allows the stove to radiate warmth long after the fire has died down, providing consistent heating throughout the day and evening. The stove is available in several finishes, including classic black and a striking blue-black enamel, enabling it to seamlessly fit into various interior styles, from rustic to contemporary.

The Jotul F 3 also includes a large glass window that offers an unobstructed view of the flames, enhancing the cozy ambiance of any room. The airwash system keeps the glass clean, ensuring a clear view of the fire while minimizing the need for frequent cleaning.

With a heating capacity of up to 1,800 square feet, the Jotul F 3 is ideal for both small and medium-sized spaces. Its compact size does not compromise on performance, and it features a sizable firebox that allows for extended burn times, meaning less frequent refueling.

Another notable characteristic of the Jotul F 3 is its user-friendly design. The stove includes easy-to-use controls for adjusting the airflow, allowing users to optimize the burn rate and heat output based on their preferences.

In conclusion, the Jotul F 3 is a versatile and efficient wood stove that combines classic aesthetics with modern technology. Its high combustion efficiency, durable cast iron construction, and elegant design make it a sought-after choice for anyone seeking warmth and beauty in their home. With its commitment to both functionality and style, the Jotul F 3 stands out as an exemplary heating solution that will serve homeowners for years to come.

Jotul F 3 operating instructions Alcove, Height above the top of the stove = 40 1015mm

Models: F 3