and two red arrows will appear in the touch screen display panel, indicating that you are in programming mode.
The first screen will show:
<FILTER NO >
By repeatedly pushing the right arrow > the display shows all the functions you can change or check:
WATER HARDNESS LEVEL 2 AROMA STRONG
TEMP. HIGH WATER QUANTITY 1 CUP 150 ML STEAM 60 SEC WATER PORTION TIME
UNIT ON --:--
OFF AFT. 2 HRS SUPPLIED ...
LANGUAGE ENGLISH
Changing the different functions works in the following pattern:
•Push and hold the P button, until the two red arrows show in the display.
•Go to the function you want to program by repeatedly pushing the left of right arrows.
•Touch ST@RT
•Change the function to the desired setting using either arrow.
•Confirm the new setting by touching ST@RT.
•Push the P button, to leave programming mode.
PROGRAMMING / ACTIVATING CLARIS FILTER Activating the Claris Cartridge is explained in chapter 16a.
PROGRAMMING WATER HARDNESS
Changing the water hardness level is explained in chapter 17.
18a. PROGRAMMING AROMA
The factory setting is STRONG. You can change to NORMAL. In NORMAL the Impressa F9 will grind a little less coffee in each of the three strength selections (coffee bean symbols).
•Press the
•Touch the right arrow symbol repeatedly until the display. shows AROMA STRONG.
•Touch ST@RT.
•Touch the right arrow once: AROMA NORMAL.
•Touch ST@RT to confirm.
•Press P button to return to SELECT PRODUCT.
18b. PROGRAMMING TEMPERATURE
The factory setting is HIGH. You can change to NORMAL. In NORMAL the temperature is approx. 7º F lower than in high.
•Press the
•Touch the right arrow until the display shows TEMP. HIGH.
•Touch ST@RT.
•Touch the right arrow once: TEMP. NORMAL.
•Touch ST@RT to confirm.
•Press P button to return to SELECT PRODUCT.
18c. PROGRAMMING WATER QUANTITY (cup sizes)
Each of the three cup symbols (Fig. 5) in the touch screen dis- play can be set to any size from 30 and 240 ML (milliliters), respectively 1 to 8 oz. (30 ML = 1 oz.). The factory settings for
18.