Jura Capresso 63942R 18d. PROGRAMMING THE 1-CUPBUTTON, Strong, 18e. PROGRAMMING STEAM PORTION

the three cup symbols are:

BIG CUP:	240 ML (8 oz.)
COFFEE (cup):	150 ML (5 oz.)
ESPRESSO (cup): ..	60 ML (2 oz.)

•Press the P-Button.

•Touch the right arrow until the display shows WATER QUANTITY.

•Touch ST@RT. The display shows SELECT PRODUCT and illuminates the three cup symbols.

Please note: touch all three cup symbols and the display will show you the actual cup size. e.g. BIG CUP 240 ML or ESPRES- SO 60 ML.

a. Touch the cup symbol for which you want to change the size. e.g. ESPRESSO 60 ML.

b. Touch ST@RT. The number 60 starts blinking.

c. Use the right arrow to increase, the left arrow to decrease the size. Push the arrow repeatedly, until the desired cup size is displayed: e.g. ESPRESSO 45 ML (= 1 1⁄2 oz.).

d. Touch ST@RT to confirm. The display shows WATER QUANTITY. You can touch another cup symbol to change that size (repeat steps a through d) or press the P Button to return to SELECT PRODUCT.

18d. PROGRAMMING THE 1-CUP BUTTON

You can change the cup size for the 1-Cup Button (Fig. 3c). Choose from 30 to 240 ML (= 1 to 8 oz.).

Please note: The 2-Cup Button automatically delivers twice as much coffee.

The factory setting for the 1-Cup Button is 120 ML (4 oz.), for the 2-Cup Button 240 ML (8 oz.).

•Press the P-Button.

•Touch the arrow until the display shows 1 CUP 120 ML.

•Touch ST@RT. The number 120 starts blinking.

•Touch the right or left arrow repeatedly until the desired size is displayed.

•Touch ST@RT to confirm. The display lets you now select the strength for the 1-CUP button.

•Touch the bean symbols to choose MILD, NORMAL or

STRONG.

•Touch ST@RT to confirm.

•Press the P Button to return to SELECT PRODUCT.

18e. PROGRAMMING STEAM PORTION

The steam portion can be programmed between 3 and 60 sec- onds. The factory setting is STEAM 60 SEC.

•Press the P-Button.

•Touch the arrow until the display shows STEAM 60 SEC.

•Touch ST@RT. The number 60 starts blinking.

•Touch either arrow repeatedly until the desired duration is shown.

•Touch ST@RT to confirm.

•Press P button to return to SELECT PRODUCT.

Please note: During steaming you can always stop the flow of steam by simply pushing the Steam Button. This will not change the setting. When the steam output stops you can immediately resume steaming by pressing the steam button again.

18f. PROGRAMMING WATER PORTION

The Hot Water Button can be programmed to dispense any amount up to approx. 16 oz. (480 ML). The factory setting is 5 oz. (150 ML).

19.