•Open the ground coffee lid and drop in one white cleaning tablet (Fig. 24).
•Push the Rinse button. The display shows MACHINE CLEANING. The cleaning program will dispense hot water in intervals through the coffee spout into the drawer.
•When finished, the display shows EMPTY TRAY and the machine "beeps".
•Lift and remove the drawer. Empty the used coffee container and drawer and replace. The display shows SELECT PRODUCT indicating the machine is now ready to brew coffee again.
20b. DECALCIFYING PROCEDURE
The machine has an integrated decalcifying program. When the display shows MACHINE SCALED SELECT PRODUCT it is time to decalcify the machine. You can still make coffee howev- er, it is highly recommended that you decalcify the machine within the next 3 to 4 days.
Please note: If you use the Claris water cartridge and the dis- play shows MACHINE SCALED SELECT PRODUCT, then your cartridge function is not activated. Follow the instructions in chapter 16a to program the Claris Cartridge function.
Important: The decalcifying program must not be interrupted.
DECALCIFYING AGENT: Only use our special decalcifying tablets. For supplies see chapter 22.
CAUTION: Never use vinegar or any other decalcifying agent. This might damage internal parts of the machine.
1.Turn off machine and let cool down for at least one hour. Empty Water tank.
2.With the machine off, push and hold the Rinse Button (Fig. 3b) until the display shows EMPTY TRAY.
3.Remove and empty the drawer and replace complete assembly (Fig. 23).
Important: Even if the drawer is empty, you still need to remove it for approx. 20 seconds and then replace it. The display shows
AGENT IN TANK PRESS MAINT..
4.Dissolve three of the large, square tablets in 16 oz. of water and pour this mixture into the water tank.
Please note: Do not use more than 16 oz. of water.
5.Replace water tank.
6.Place a container (at least 16 oz.) underneath the frother.
The displays still shows AGENT IN TANK PRESS MAINT.
7.Push the Rinse Button. The machine will pump the mixture through the frother in intervals. Then it pumps the mixture (internally) into the drawer. During this procedure the display shows MACHINE DESCALED. When this cycle is finished the machine beeps and the display shows EMPTY TRAY.
8.Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and thoroughly rinse all parts and replace. The display shows FILL WATER.
9.Remove the water tank, rinse thoroughly, fill with cold fresh water (approx. 16 oz.) and replace.
10.Place a container (at least 16 oz.) underneath the frother. The display shows PRESS MAINT. FILL WATER.
11.Push the Rinse Button. First the machine will pump hot water in intervals through the frother to remove any decalcifying mixture. During this procedure the display shows MACHINE DESCALED. When the cleaning cycle is finished the machine beeps and the display shows
23.
