Jura Capresso 63942R Daily Preparation, Grinding And Brewing, Strong, Using Pre-Groundcoffee

Important: The grinding grade can only be adjusted while the grinder is actually grinding.

Attention: Oily beans tend to stick together. Stir beans just before grinding to ensure a proper flow of beans into the burrs.

9. DAILY PREPARATION

We recommend filling the water container every morning with fresh, cold water. This will enhance the taste of your coffee.

•Push and hold the On/Off button until the display turns on. After WWW.IMPRESSA-F-LINE.COMthe display shows HELLO YOUR MACHINE IS HEATING. After approx. two minutes the display shows PRESS MAINT. and the red light in the Rinse Button (Fig. 3b) will illuminate.

•Press the Rinse Button. Hot water will warm up all internal parts and pump through the coffee spouts. The water will be caught in the drawer underneath. The rinse cycle stops by itself and the display reads: SELECT PRODUCT. The cup and bean symbols illuminate. You are now ready to make coffee.

10. GRINDING AND BREWING

The F9 uses a 2-step brewing process (Pre-Brew Aroma System). This process first moistens the ground coffee (pre-brew phase), stops for a few seconds and then starts the brewing process.

Please note: After the pre-brew phase you can stop the brewing process at any time by simply pushing the 1-Cup button. This will not affect your cup settings.

10a. SELECTING CUP SIZE AND STRENGTH

With the machine in the SELECT PRODUCT mode, you can choose five cup settings and three different strength settings.

•Adjust the height of the coffee spout to your cup size (Fig. 14) and place one or two cups underneath the coffee spouts.

Option One: Touch Screen Controls (Fig. 5)

On the touch screen display you can choose from three cup sizes and three strength settings, for total of 9 settings:

BIG CUP, COFFEE, ESPRESSO each in MILD, NORMAL or

STRONG.

•Touch the symbols and watch how the display changes.

•Once you have selected your preferred combination, just touch and hold ST@RT until grinding begins.

Please see chapter 5 for the amount of coffee brewed for each of the symbols. To change these cup sizes see chapter 18c. Please note: You need to touch ST@RT for one second to activate the grinding/brewing process. This delayed action prevents the machine from making coffee if somebody accidentally touches the ST@RT symbol.

Option Two: 1-Cup and 2-Cup Buttons

In addition to the nine selections on the touch screen you can also use the 1-Cup and 2-Cup button (Fig. 3c, 3d) to grind and brew coffee.

Please see chapter 5 for the amount of coffee brewed for these buttons. To change these cup sizes see chapter 18d.

Please note: The 2-Cup button will automatically brew twice as much coffee (max. 16oz.) as the 1-Cup button.

11. USING PRE-GROUND COFFEE

You can also use pre-ground coffee, bypassing the grinder. This comes in handy if someone requests decaf, sugar coated or flavored coffee.

•Push the Pre-Ground Coffee Button (Fig. 3f). The display shows:

FILL POWDER SELECT PRODUCT.

•Open the lid for the ground coffee funnel (Fig. 1.8) and fill the funnel with one or two scoops of ground coffee.

13.