Topcom E300 Changing the system PIN, Switching the ECO low radiation mode ON/OFF

Topcom Butler E300/Twin/Triple/Quattro

5.17 Changing the system PIN

The system PIN code (default = ‘0000’) is used to protect various settings like register rights, access right to some menu’s in the phone. You can change the PIN:

Press Menu button ÆUse the Down button to scroll to ‘System’ and press

ÆUse the Up or Down button and select ‘Change Pin’ Æ Enter the old pin and press Æ Enter the new PIN and press OK Æ Enter the new PIN again to confirm and press .

5.18 Switching the ECO (low radiation) mode ON/OFF

When low radiation is activated the base will emit 10% less during standby compared to the normal power mode. During communication the handset power will be reduced depending on the distance between handset and base.

You can turn this function ON or OFF:

Press Menu button ÆUse the Down button to scroll to ‘System’ and press

ÆUse the Up or Down button and select ‘Low Power’ Æ Select ON or OFF and

press to confirm.

5.19 Using the alphanumerical keypad

With your telephone you can also enter alphanumeric characters. This is useful for entering a name into the phonebook, giving a name to a hand-set, …

To select a letter, press the corresponding key as many times as is necessary. For example to select an ‘A’, press ‘2’ once, to select a ‘B’, press ‘2’ twice and so on. To select ‘A’ and then B consecutively, select ‘A’, wait until the cursor moves on to the next character, then press ‘2’ twice.

To select a space, press 1. To erase a single character press the delete key. To delete

all characters press and hold the delete key.

The keypad characters are as follows:

Key	First	Second	Third	Fourth	Fifth	Sixth	Seventh	Eighth
	press	press	press	press	press	press	press	press
1	Space	1
2	A	B	C	2
3	D	E	F	3
4	G	H	I	4
5	J	K	L	5
6	M	N	O	6
7	P	Q	R	S	7
8	T	U	V	8
9	W	X	Y	Z	9
0	0

8 Topcom Butler E300/Twin/Triple/Quattro