Topcom Butler E300/Twin/Triple/Quattro
8Register to a Topcom Butler E300 base
You can subscribe 4 handsets to one base unit. By default, each handset is subscribed as handset 1 on the base unit upon delivery (base unit 1).
!!! You only need to subscribe the handset if:
•The handset subscription has been removed from the base unit (e.g. for reinitialisation)
•If you want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Topcom Butler E300 handset and base unit!! Keep the Paging key on the base unit pressed for 4 seconds. During one minute the base unit is in register mode and you must do the following to subscribe the handset:
Press Menu button 
ÆUse the 
button to scroll to ‘System’ and press 
Æ
Select ‘Register’ Æ Enter the base pin code (0000) and press 
. Enter the number of the base unit you would like to subscribe the handset to
8.1Selecting a base unit
You can switch your handset between different registered base units if you have registered a handset to more then one base. You can manually select the base unit or automatically let the handset choose the nearest base.
Press Menu button 
ÆUse the 
button to scroll to ‘System’ and press 
Æ Select ‘Select base. Æ Select ‘Auto’ or the base number 
/ 
keys and press 
.
8.2Removing a handset
You can remove a handset from a base to allow another handset to be registered: Press Menu button 
ÆUse the 
button to scroll to ‘System’ and press 
Æ Select ‘Delete HS’. Press OK and select the handset you which to remove
OK to confirm Æ Enter the pin code (0000) and press 
.
You can only remove existing handsets and others then the one you are using.
ENGLISH
Topcom Butler ME300/Twin/Triple/Quattro | 11 |
