Jura Capresso 63942R warranty 18g. SETTING THE TIME, 18h. SETTING THE AUTO-ONTIME

•Press the P-Button.

•Touch the right arrow until the display shows WATER PORTION.

•Place a cup or container underneath the frother (Fig. 15 ).

•Touch ST@RT. The display shows PRESS KEY and the red light in the Hot Water Button illuminates.

•Push the Hot Water Button. Hot water will be pumped through the frother into the cup. The display reads ENOUGH WATER? PRESS KEY.

•When the desired amount of hot water is dispensed, push the Hot Water Button to stop the flow. The amount of hot water in your cup is now programmed. The display shows WATER PORTION.

•Press the P button to return to SELECT PRODUCT.

Please note: When pumping hot water through the steam noz- zle you can always stop the flow of hot water by simply pushing the Hot Water Button. This will not change the programmed set- ting. When the hot water output stops, you can dispense more by pressing the Hot Water button again.

18g. SETTING THE TIME

You can enter the actual time into the machine. Once the time is set you can then program the machine to turn on at a specific time (next chapter).

Please note: The time is displayed in the 24 hr mode (not AM/PM). If the actual time is 3:45 pm you must set the time to 15:45.

•Press the P-Button.

•Touch the right arrow until the display shows TIME --:-- .

•Touch ST@RT. The hour segment starts blinking.

•Touch either arrow repeatedly to set the hours.

•Touch ST@RT to confirm. The minute segment starts blinking.

•Touch either arrow repeatedly to set the minutes.

•Touch ST@RT to confirm. Now the actual time is set.

•Press the P button to return to SELECT PRODUCT.

Please note: The Impressa F9 will keep the time as long as the machine is plugged in. If you unplug the machine or if you have power interruption, the time will be lost.

18h. SETTING THE AUTO-ON TIME

You must first set the time (chapter above).

You can set the machine to turn on at a specific time. It will turn on at that time, warm up and the display shows PRESS MAINT. Press the Rinse Button and you are ready to brew coffee.

•Press the P-Button.

•Touch the right arrow until the display shows UNIT ON --:--.

•Touch ST@RT. The hour segment starts blinking.

•Touch either arrow repeatedly to set the hours.

•Touch ST@RT to confirm. The minute segment starts blinking.

•Touch either arrow repeatedly to set the minutes.

•Touch ST@RT to confirm. Now the Auto Turn On time is set.

•Press the P button to return to SELECT PRODUCT.

18i. SETTING THE AUTO SHUT-OFF

Your F9 is programmed to turn off 2 hours after last use. Select from 1⁄2 hour to 9 hour shut-off or no automatic shut-off.

•Press the P-Button.

•Touch the right arrow, the display shows OFF AFT. 2.0 HRS.

•Touch ST@RT.

•Touch either arrow repeatedly until desired setting is displayed.

•Touch ST@RT to confirm.

20.