Jura Capresso IMPRESSA J5 manual Hot water

Models: IMPRESSA J5

1 104
Download 104 pages 60.22 Kb
Page 45
Image 45
Hot water

Hot water

CAUTION

5 Preparation at the touch of a button

To ensure that the Professional Cappuccino Frother works perfectly, you should rinse and clean it regularly. The description for this can be found in Chapter 8, ‘Maintenance – Professional Cappuccino Frother’.

To obtain a perfect water flow, attach the exchangeable hot water nozzle. You can find the nozzle under the cover of the storage compartment.

There is a danger of scalding from hot water splashes.

lAvoid direct contact with the skin.

Start by exchanging the nozzle:

l Carefully remove the Professional Cappuccino Frother from the Connector System©.

l Open the cover of the storage compartment. Take out the hot water nozzle and close the cover again.

l Stick the hot water nozzle onto the Connector System© by lightly rotating.

l Place a cup under the hot water nozzle.

ql Press the hot water button.

WATER appears on the display, and then the pre-set tem- perature briefly appears.

The pre-set amount of water flows into the cup and the process stops automatically.

READY

oBy pressing the hot water button several times (within approx. 2 seconds) you can set the temperature to your individual preference. This setting is not saved.

oDuring preparation, you can change the amount by turning the Rotary Switch.

45

Page 45
Image 45
Jura Capresso IMPRESSA J5 manual Hot water