7 Permanent settings in programming mode
ÄL Turn the Rotary Switch until EXIT appears.
Ml Press the Rotary Switch to exit the programming mode.
READY
Units amount of water/ The unit for the amount of water is set in the factory. You can set the
time format | unit for the amount of water to ML or OZ. |
| The time format is set in the factory. You can set the formats |
| 24 HRS or AM/PM. |
| Example: To change the unit for the amount of water from ML to |
| OZ, proceed as follows. |
| Precondition: READY appears on the display. |
Ml Keep the Rotary Switch pressed until RINSE appears.
ÄL Turn the Rotary Switch until DISPLAY appears. M l Press the Rotary Switch to enter the programme item.
ML/OZ.
oTo change the time format, turn the Rotary Switch until 24H/AM PM is displayed.
Ml Press the Rotary Switch to enter the programme item.
ML
ÄL Turn the Rotary Switch until OZ appears.
M l Press the Rotary Switch to confirm the setting. OK appears briefly on the display.
ML/OZ
ÄL Turn the Rotary Switch until EXIT appears.
Ml Press the Rotary Switch to exit the programme item.
DISPLAY
ÄL Turn the Rotary Switch until EXIT appears.
Ml Press the Rotary Switch to exit the programming mode.
READY
51