Manual cleaning
Descale machine
CAUTION
CAUTION
CAUTION
CAUTION
8 Maintenance
The cleaning operation is now complete. The IMPRESSA is ready for use again.
You can initiate the ‘Cleaning the machine’ operation manually.
Precondition: READY appears on the display.
Ml Keep the Rotary Switch pressed until RINSE appears.
Ml Press the Rotary Switch to enter the programme item.
RINSE
Äl Turn the Rotary Switch until CLEAN appears. M l Press the Rotary Switch.
EMPTY TRAY
l Continue with the second prompt to take action (indicated by l), as is described under ‘Cleaning following a prompt’.
The IMPRESSA builds up deposits of limescale over time and auto- matically prompts you to descale it. The degree of calcification de- pends on the degree of hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this can cause irritation.
lAvoid contact with the skin or eyes.
lRinse the descaling agent off with clean water. Should you get any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam- aged and/or traces of detergent could be left behind in the water.
lUse only original JURA care products.
If the descaling operation is interrupted, there may be damage to the machine.
lAllow the descaling program to run to the end.
If the descaling agent comes into contact with sensitive surfaces, damage cannot be ruled out.
lClean up any splashes immediately.
57
