Jura Capresso IMPRESSA J5 manual Energy save mode

7 Permanent settings in programming mode

AL Press the 1 Espresso button.

WATER

ÄL Turn the Rotary Switch until TEMP. appears.

Ml Press the Rotary Switch to enter the programme item.

NORMAL

ÄL Turn the Rotary Switch until HIGH appears. M l Press the Rotary Switch to confirm the setting.

OK appears briefly on the display.

TEMP.

ÄL Turn the Rotary Switch until EXIT appears.

Ml Press the Rotary Switch to exit the programme item.

BUTTONS

ÄL Turn the Rotary Switch until EXIT appears.

Ml Press the Rotary Switch to exit the programming mode.

READY

Energy save mode	An energy saving mode permanent setting can be made under this
	programme item (E.S.M.©).

Your IMPRESSA has two energy-saving modes:

pENERGY -

u Your IMPRESSA is continuously ready for use.

u All coffee and milk products, as well as hot water, can be pre- pared without having to wait.

pENERGY √

u After approx. 5 minutes, your IMPRESSA switches to the en- ergy-saving temperature and is not ready for use.

u Before coffee, hot water or milk is prepared, the machine heats up for approx. 30 seconds.

oENERGY - is defined under the basic settings.

Example: To change the energy-saving level from ENERGY - to

ENERGY √, proceed as follows:

Precondition: READY appears on the display.

Ml Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until ENERGY - appears.

48