JVC AV-14FMT3, AV-14FMG3B, AV-1435EE, AV-1435TEE, AV-1438, AV-14FMG3/-A, AV-14F3 Tint, Crt, Socket

											AV-14F3/AV-1435
											AV-1435EE/AV-1435TEE
											AV-14FMT3/AV-1438
											AV-14FMG3/AV- 14FMG3B
	Item	Measuring			Test point					Ad justment part	Description
		instrument
Ad justment		Signal							6. TINT		[Method of adjustment without measuring instrument]
of TINTⅠ		generator
		Remote							NTSC 3.58 TINT		1.Input a NTSC 3.58 full field colour bar signal (75% white).
		control unit									2.Enter the SERVICE MENU.
											3.Select 2. V/C from SERVICE MENU.
											4.Select 6. TINT with the MENU ▼/▲ key.
											5.Set the initial setting value of NTSC 3.58 with the MENU - / +
											key.
											6.If you cannot get the best tint with the initial setting value, make
											fine adjustment until you get the best tint.
									NTSC 4.43 TINT		When NTSC 3.58 is set, NTSC 4.43 will be automatically set at the
											respective values .
Ad justment		Signal			TP-47G/R				6. TINT		[Method of adjustment using measuring instrument]
of TINTⅡ		generator			TP-E (#)
		Oscillo-			[CRT				NTSC 3.58 TINT		1.Input a NTSC 3.58 full field colour bar signal (75% white).
		scope			SOCKET						2.Enter the SERVICE MENU.
					PWB]
											3.Select 2. V/C from SERVICE MENU.
		Remote
											4.Select 6. TINT with the MENU ▼/▲ key.
		control unit
											5.Set the initial setting value of NTSC 3.58 with the MENU - / +
											key.
											6.Connect the oscilloscope between TP-47G/R and TP-E. (#).
											7.Adjust NTSC 3.58 TINT to bring the value of (B) in the
											illustration +9V(W- Cy). (Voltage value between (W) and (Cy))
						Mg	R	B
								(－)
									0V
		W					(B)
			Y					(＋)
				Cy
					G

NTSC 4.43 TINT

When NTSC 3.58 is set, NTSC 4.43 will be automatically set at the respective values .

No. 52026 25