I N I T I A L S E T U P 33
TV GUIDE PLUS+ OPTIONS MENU
The TV Guide Plus+ Options Menu shows you the options of TV Guide Plus+.
To TV GUIDE PLUS+ MENU
To operate
PIP | TV Guide Plus+ |
Opt ions Menu |
Set up TV Guide Plus+
TV Guide Plus+ Channel
Edit or
View TV Guide Plus+
❑“Setup TV Guide Plus+” is where you will set up TV Guide Plus+ to control your TV. The information for this procedure is on
pages 18 to 22.
Note: “Demo” will start the TV Guide Plus+ demonstration mode.
❑“TV Guide Plus+ Channel Editor"…
You can setup view or not the channel on TV Guide Plus+. If the Station ID (e.g. KCBS) and the channel do not match, you can correct the received channel
GREEN to select TV Guide Plus+ Channel Editor
To the channel you want to edit
RESET: Reset all the channels ON/OFF setting to the initial settings.
ON: The channel will appear on Guide Plus+ list. If you set ON when you select the channel which no station is preset you will get the following
message:
Continued…
Continued…
"You must enter a valid channel number before turning a channel on." Enter the correct number with the
OFF: The channel will not appear on the Guide Plus+ list.
EXIT: Return to the TV Guide Plus+ Options Menu.
10 Digit key: You can correct the wrong channel number for a station by entering the correct number with the
TV GUIDE PLUS+ DEMO
Demo lets you view the features of TV Guide Plus+ right onscreen.
To TV GUIDE PLUS+ DEMO
To begin the Demo
❑When you operate the Demo screen…
Press the BLUE, RED, YELLOW, or GREEN buttons on the remote control, and you can actually operate the TV Guide Plus+ demo information.
Note: If you operate the VCR under Demo, the signal from the IR Mouse is not available.
❑When you cancel the Demo…
Press the Front Panel VOLUME+ and CHANNEL– simultaneously
Press the EXIT button on the remote
Press the GUIDE/TV button
NOTES:
TV Guide Plus+
Channel Editor: When you enable more channels, you reduce the amount of program informa - tion that TV Guide Plus+ can display.
Refer to page 17 regarding Auto Tuner Setup.
