70
Setup Menu
Parameter Possible settings Description
232C [TYPE1]
PROTOCOL TYPE TYPE2
TYPE3
TYPE4
TYPE5
TYPE6
TYPE7
TYPE8
232C [T1 ]
T2
T3
T4
T5
T6
T7
T8
MENU
MENU
Set this item according to the type of controller connected when performing remote
control using the RS-232C terminal.
TYPE1 :Standard operation mode
TYPE2 :For customized use
TYPE3 ~ TYPE8 : Spare
This button is used to return to the Setup Menu screen.
71
Parameter Possible settings Description
DISPLAY OFF
[ON]
dISPLY oFF
[oN]
TITLE/CHAPTER/ [OFF]
INDEX TITLE+CHAPTER
INDEX+TITLE
TITLE [oFF]
T+C
I+T
RECORDER [OFF]
MODE ON
ModE [oFF]
oN
TIME/DATE [OFF]
DATE
TIME
TIME+DATE
dATE [oFF]
dATE
TIME
T+d
REMAIN [OFF]
ON
REMAIN [oFF]
oN
DATE STYLE YY/MM/DD
[MM/DD/YY]
DD/MM/YY
dSTYLE YMd
[MdY]
dMY
LCD [TITLE+CHAPTER]
INDEX
LCd [T+C]
INd
MENU
MENU
DISPLAY MENU Screen
The following table identifies and describes the parameters that may be set using the DISPLAY screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
This parameter is used to indicate whether or not status and alarm information is to
be displayed on the monitor screen.
OFF :No such data is to be displayed on-screen.
ON :Data is to be displayed on-screen.
When this parameter has been set to ON, the following parameters can be
used to indicate which types of status information will be displayed
For selecting whether to display the title/chapter/index information of a DVD disc
onscreen during recording or playback.
OFF :Do not display onscreen
TITLE+CHAPTER:Display title and chapter onscreen
INDEX+TITLE :Display index and title onscreen
These will not be displayed onscreen when the DISPLAY menu item is set to OFF.
This parameter is used to indicate whether or not the DVD recorder’s current status
is to be displayed on-screen.
OFF :The status is not to be displayed on-screen.
ON :The status is to be displayed on-screen. Note, however, that nothing will be
displayed when OFF has been set for the DISPLAY parameter.
This parameter is used to indicate whether or not the current date and/or time are to
be displayed on-screen.
OFF :No such information is to be displayed on-screen.
DATE :Only the date is to be displayed.
TIME :Only the time is to be displayed.
TIME+DATE:Both date and time are to be displayed.
●When the DVD recorder is stopped or recording, data from the internal clock is
displayed. When playing a disc, the date and time of disc recording are displayed.
●Even if DATE, TIME, or DATE+TIME have been selected, nothing will be displayed
when OFF has been set for the DISPLAY parameter.
This parameter is used to indicate whether or not the disc’s remaining time (in minutes)
is to be displayed on-screen.
OFF :No such data is to be displayed on-screen.
ON :This data is to be displayed on-screen.
●During recording, the remaining space available for recording is displayed (in minutes).
During playback, the time remaining in the current title is displayed.
●Nothing will be displayed when OFF has been set for the DISPLAY parameter.
Note
The remaining space available for recording will depend on factors such as the number
of titles recorded and the data encoding method; accordingly, this value should be
treated as an estimate and not as an exact value.
This parameter is used to select the display style for dates.
YY/MM/DD:Dates are to be displayed in year, month, and day sequence.
MM/DD/YY:Dates are to be displayed in month, day, and year sequence.
DD/MM/YY:Dates are to be displayed in day, month, and year sequence.
Default Setting :MM/DD/YY (NTSC)
DD/MM/YY (PAL)
For selecting the DVD disc information to display (title/chapter/index) on the LCD
during recording or playback.
TITLE+CHAPTER: Display title and chapter on LCD
INDEX : Display index on LCD
This button is used to return to the Setup Menu screen.