~TV/monitor

Composite video cord (supplied)

S-Video cord (not supplied)

Green

Red

 

Blue

Component video cord (not supplied)

To select progressive scanning mode (see page 6), use COMPONENT jacks.

Connect the VIDEO jack, S-VIDEO jack, or COMPONENT jacks; whichever you want to use.

You can get better picture quality in the order— Composite video ] S-Video ] Component video.

ŸAM/FM antenna

To assemble the AM loop antenna

To connect AM/FM antenna

If the antenna cord is covered with vinyl on the tip, twist and pull the vinyl off to remove.

AM loop antenna (supplied)

Turn until the best reception is obtained.

FM antenna (supplied)

Extend it so that you can obtain the best reception.

For better FM reception

FM outdoor antenna (not supplied)

Disconnect the supplied FM antenna, and connect an outdoor FM antenna using a 75 wire with coaxial type connector (IEC or DIN45325).

Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.

!Powered subwoofer

Audio Cord (not supplied)

From the powered subwoofer (not supplied)

Before plugging the powered subwoofer to the main unit, make sure that the powered subwoofer is turned off or at minimum volume.

The subwoofer output level varies follow to the System master volume.

4

Page 7
Image 7
JVC CA-DXJ36 manual ~ TV/monitor, Powered subwoofer, To assemble the AM loop antenna To connect AM/FM antenna