JVC CA-DXJ36 manual Listening to the Radio

Adjusting the Volume

To preset stations

Remote

ONLY

The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).

Remote control: Main unit:

To drop the volume in a moment	Remote
	ONLY

To restore the volume, press again or adjust the volume level.

(while holding...)

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

•You can also store the monaural reception mode for FM preset stations if selected.

2Activate the preset number entry mode.

•Finish the following process while the indication on the display is flashing.

•To cancel the operation during procedure, press CANCEL while holding SHIFT.

3Select a preset number for the station you store.

• To select a number, see “How to select a number” on page 8.

• You can also use ¢/4 buttons.

Listening to the Radio INFO

To select the band (FM/AM)

TUNER FM TUNER AM

AUX

To tune in to a station

While FM or AM is selected...

1sec.

Increases the frequency.

Decreases the frequency.

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.

•When you repeatedly press the button, the frequency changes step by step.

To manually stop the searching, press either button.

4Store the station.

To tune in to a preset station

1Select the band (FM or AM).

TUNER FM TUNER AM

AUX

2Select the preset number for the station you stored.

•To select a number, see “How to select a number” on page 8.

• You can also use ¢/4 buttons.

If the FM reception is poor

Remote

ONLY

The MONO indicator lights on the display. Reception will improve though stereo effect is lost—monaural reception mode.

To restore the stereo effect, press the button again (the MONO indicator goes off).

9