Advanced Playback Operations (see pages 20
to 22)
Programming the Playing Order—Program Play:
–While programming steps...
Your entry will be ignored if you have tried to program an item number that does not exist on the disc (for example, selecting track 14 on a disc that only has 12 tracks).
–For SVCD/VCD/CD loaded on the other tray than the current one, the System may prompt for the group number entry as well; however, these entries will be ignored during playback.
•The programmed contents will remain until you erase it.
•While the PROGRAM indicator is on, you cannot change the disc to play. (DISC 1 – 5 on the remote control and DISC 1 – 5 # on the main unit do not work.)
On-Screen Operations (see pages 23 to 28)
Operations Using the
•
Recording Operations (see pages 29 to 30)
General:
•You cannot change the source during recording.
•There is leader tape which cannot be recorded onto at the start and the end of cassette tapes. Thus, before recording, wind the leader tape first to ensure that the recording will be made without any music part lost.
•If no cassette is inserted or a protected tape has been inserted, “NO REC” appears on the display.
•The recording level is automatically set correctly. Thus, you can make sound adjustments other than Surround Mode without affecting the recording level.
Recording onto a Tape:
•While recording disc/USB mass storage class device, plugging in and out headphones may cause sound distortion and affect the recording.
•When using Reverse Mode for recording, start recording in the forward (3) direction first; otherwise, recording will stop when only one side (reverse) of the tape is recorded.
Synchronized Recording:
•You cannot open the disc tray while recording onto a tape using USB/DISC REC START button.
•Recording starts from the first track even if you have selected a track by using 4/¢. To specify track(s) to record, program them (not applicable for USB mass storage class device) or use One Track Recording.
•While recording, you cannot use disc/USB mass storage class device operation buttons (except for 7).
•You cannot use Repeat Play during synchronized recording (Repeat Play will be canceled).
•USB/DISC REC START button does not work:
–While playback is paused.
–When Random Play mode is selected.
–When playing back in Program Play mode.
•When using Reverse Mode and the tape reaches its end in the forward direction (3) during recording, the last song will be
•When using Reverse Mode and the tape reaches its end in the reverse side (2) during recording, recording stops even though the disc/USB mass storage class device is not entirely recorded.
Enjoying Karaoke (see pages 31 to 34)
General:
•When Mic Mixing or Vocal Masking is activated:
–
–Dolby Pro Logic II will be canceled temporarily.
•When Mic Mixing is activated and ALL CH ST is selected as the Surround mode, the output level of surround speaker decreases.
•While recording onto a tape, Key adjustment, Echo and Vocal Masking will be recorded. However, while recording onto a tape using USB/DISC REC START, Key adjustment will not be recorded.
•While the System is turned on, connecting a microphone automatically activates Mic Mixing and all the Karaoke related functions.
•If you connect a microphone with the System turned off, press MIC MIX while holding SHIFT to activate Mic Mixing after turning the System on.
Adjusting the Sound Track for Karaoke:
•On some music, Vocal Masking does not provide the correct effect.
Scoring Your Karaoke Skill:
•Karaoke Scoring does not work for DVD Audio, but you can activate or deactivate the function while playing back DVD Audio.
•While Karaoke Scoring is in use, you cannot deactivate Mic Mixing or use MIC MIX, RESERVE and number buttons.
•Activating Karaoke Scoring cancels Repeat Play.
•You cannot use Karaoke Scoring during Program Play, Random Play, or recording. However, you can turn Karaoke Scoring on and off by using
KARAOKE SCORING button during these play modes.
•The ranking (top 3) is cleared when you turn off the System.
42
