JVC CA-HXZ1R manual Start

English

7Auto Edit Recording	4 Press SET/DISPLAY.
By using Auto Edit Recording, you can record the CD tracks	• Each time you press the button, the tracks
to fit the tape. Auto Edit Recording makes a program by	to be recorded on the front side (“SIDE-A”)
selecting the CD tracks in numerical order. However, to	and on the reverse side (“SIDE-B”) appear
prevent the end of the last track on the front side from being	on the display alternately.
cut off, the last track is selected so to fit the remaining tape	Tracks to be recorded on the
length.	reverse side (SIDE-B) appear.

SET /

DISPLAY

On the unit ONLY:

1 Load CDs.

•If the current playing source is not the CD player, press CD 3´8, then 7 before going to the next step.

2 Press EDIT. EDIT

3 Press one of the disc number		CD3
	(CD1, CD2, and CD3) buttons	CD2
	to select the disc you want to	CD1
	record from.

The optimum tape length for the disc appears.

To change the tape length manually

If the tape length selected is not satisfactory, you can change the tape length by turning 4 / ¢on the unit. You can select the tape length among the following —40, 46, 50, 54, 60, 64, 70, 74, 80, 84, and 90.

5 Insert a recordable cassette of appropriate length into the cassette deck.

6	Press REVERSE MODE so that		REVERSE
			MODE
	the Reverse Mode indicator lights
	up like	.
	• Without turning on the Reverse Mode,
	recording will stop when the front side of
	the tape is recorded.
7	Press CD REC START.		CD REC
			START

“CD REC” appears, then “TAPE SIDE-A STAND-BY” scroll through the display, and the REC (recording) lamp flashes.

The cassette deck starts recording. About 10 seconds later, the CD player starts playing.

When the recording is done, “CD REC FINISHED” scroll through the display and the REC (recording) lamp goes off. Both the cassette deck and CD player stop automatically.

•If a tape has not been rewound, the cassette deck will rewind the tape before it starts recording.

•A 10-second blank portion is automatically created at the beginning of each side of the tape.

To stop during Auto Edit Recording

Press REC START/STOP or 7to create a 4-second blank portion on the recording tape. (Remember, a 4-second blank is important when using Music Scan—see page 18.)

To cancel Auto Edit Recording

Press CANCEL/DEMO before or after recording.

– 21 –