English
Programming the Playing Order of the Tracks —Program Play
You can arrange the playing order of the tracks before you start playing. You can program up to 32 tracks.
•To use Repeat Play (see page 17) for Program Play, press REPEAT after starting Program Play. Only REPEAT 1 and REPEAT ALL can be selected for Program Play.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1 Load CDs.
•If the current playing source is not the CD player, press CD 3´8, then 7 before going to the next step.
2 Activate the Program Play mode.
On the unit:
CD PLAY
Press CD PLAY MODE repeatedly MODE until “CD PROGRAM” appears on
the display.
•Each time you press the button, the play mode changes as follows:
CD PROGRAM 
CD RANDOM
Total track number and 
total playing time (Continuous Play)
On the remote control:
Press PROGRAM so that | PROGRAM |
| |
“CD PROGRAM” appears |
|
on the display. |
|
P R G M
•If a program has been stored in memory, the program is called up.
•The PRGM (program) indicator also lights up on the display.
3 Press one of the disc number | CD3 |
| |
(CD1, CD2, and CD3) buttons | CD2 |
to select the disc you want to | CD1 |
play. |
|
Track number
P R G M
4 | Select a track from the selected |
| E |
| PR SET | ||
|
|
CD in the above step.
On the unit:
Turn 4/ ¢to select the track number and press
SET/DISPLAY.
|
|
| SET / | ||
|
|
| DISPLAY | ||
On the remote control: |
|
|
|
| |
|
|
|
| ||
Press the number buttons. | 1 | 2 | 3 | ||
• For how to use the number |
|
|
|
| |
buttons, see “To go to another | 4 | 5 | 6 | ||
track directly using the number | 7 | 8 | 9 | ||
buttons” on page 14. | |||||
|
|
|
| ||
| 10 | 10 |
|
| |
5 Program other tracks you want.
•To program tracks from the same disc, repeat step 4.
•To program tracks from a different disc, repeat steps 3 and 4.
6 | Press CD 3´8. | CD | |
|
| ||
|
| ||
The tracks are played in the order you have programed.
To stop playing, press 7.
To exit from Program Play mode, press CD PLAY MODE repeatedly (or press PROGRAM on the remote control) until the PRGM (program) indicator goes off. The program you have made is stored in memory.
•If you try to program a 33rd track “CD FULL” will appears on the display.
•If your entry is ignored
You have tried to program a track from an empty tray, or a track number that does not exist on the CD (for example, selecting track 14 on a CD that only has 12 tracks). Such entries are ignored.
Disc number | Program step number |
– 15 –
