JVC CA-MXDVA5 Basic Disc Playback, Loading Discs, Playing Back the Entire Discs Continuous Play

English

Basic Disc Playback

Before playing a DVD or VCD, select the color system as indicated on the disc.

On the unit only:

Press TAPE A while the unit is in standby mode. TAPE A Each time you press the button, “PAL,”

“NTSC,” and “SECAM” appear on the display in sequence.

About the color system

When wrong color system is selected, picture on TV screen will lose the color.

Loading Discs

1 Press 0.

The unit automatically turns on and the carrousel comes out.

2 Place one or two discs correctly on the front slots of the carrousel, with its label side up.

Playing Back the Entire Discs — Continuous Play

You can play discs continuously.

•While playing a DVD or VCD with the PBC function loaded on the disc trays, the continuous play will stop when a disc menu appears. If a menu appears while playing a

DVD or VCD with PBC function, see “Menu-Driven Playback” on page 20.

1 Load discs.

2 Press one of the disc number buttons (DVD1, DVD2, and DVD3) for the disc you want to play.

Disc play starts from the first chapter or track of the selected disc.

Chapter (or track) number of the currently playing disc is flashing. (Numbers exceeding 16 are not displayed.)

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

•Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

3 If you wish to load a third disc,	DISC CHANGE
press DISC CHANGE on the unit
or DISC SKIP on the remote
control.

The carrousel rotates by 120˚.

4 Press 0again.

The carrousel closes.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

Disc number

Disc indicator

Disc marker

•The disc marker lights up for the disc number you have selected.

•The disc indicator rotates while the corresponding disc is being played.

•The disc indicator goes off when the unit has detected that there is no disc on the corresponding disc tray.

Chapter (or title) number (DVD) Elapsed playing time Track number (VCD, CD)

•Pressing DVD 6 instead of the disc number buttons starts playing back if a disc is on the trays.

To stop during play, press 7.

•If you are playing back a disc, this unit can memorize the end point even when you turn off the unit, and when you start playback again by pressing DVD 6, playback begins from where it has been stopped. (Resume play)

•To stop completely, press 7twice.

To remove the disc, press 0.

Disc playback sequence during Continuous play

When 3 discs are loaded on the disc trays, they are played in one of the following sequences.

•When DVD1 is pressed : DVD1 ] DVD2 ]DVD3 (then stops)

•When DVD2 is pressed : DVD2 ] DVD3 ]DVD1 (then stops)

•When DVD3 is pressed : DVD3 ] DVD1 ]DVD2 (then stops)

*When only 2 discs are loaded, they are played in the same order, but the disc tray without a disc is skipped.

– 15 –