11

EXAMPLES OF CONNECTIONS

When Used with One Switcher (ISS-6020/ISS-6020G)

Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with the Switcher

allows easy adjustment and signal selection.

•Make sure that the SW1 LEVEL mode is selected from the CONNECT CONDITION menu. Contact your dealer for the informa-

tion in detail.

•For more information on the Switcher, refer to the user’s manual accompanying the ISS-6020/ISS-6020G Switcher.

•All cables mentioned above are optional.

The Switcher ISS-6020/ISS-6020G
Personal computer
Audio equipment VCR
ACAT OUT R/Cr G/Y B/Cb H/HV V S-VIDEO VIDEO OPTION REMOTE1 REMOTE2
OUT IN
INPUT SELECT ENTERON/OFFINDICATOR
I
INPUT SELECT POWER
From R, G, B, H/V on separate H and
V. on the RGB OUTPUT module
To REMOTE1
From REMOTE 1 Terminal on the
SYSTEM CONTROL module
Optional control cable 15p-15p (CTL-6010)
5BNC-5BNC coaxial cable
(separate sync)
(recommended)
To INPUT A (RGB,
H/V,V inputs)
INPUT B
INPUT C
INPUT A
3BNC-3BNC cable
(sync on green)
4BNC-4BNC cable
(composite)
DVD Player
*To connect a COMPONENT signal
of the equipment such as DVD
player to the optional RGB input
board, the projector must
recognize the optional RGB input
board as a COMPONENT input
board. See “RGB/COMPONENT
Search Setting” of the Set-up
manual.