16
BASIC OPERATION.Picture Projection
To project a picture source, proceed as follows:
1Turn on the main power of the projector.
•Press the POWER switch on the front panel to the ON position (I).
2Turn on the power of the connected equipment.
3Turn on the power of the projector.
•Press the POWER ON button on the remote control or the POWER button on the rear panel.
4Select an input signal source by pressing one of the ten INPUT buttons on the remote control. You can also select a signal from
the “INPUT SELECT” list.
•See “INPUT SELECTION” on page 24 for more details.
5Adjust the picture and sound.
•See pages 20 through 23 for more details.
NOTE: The volume function works only with the ISS-6020/ISS-6020G Switcher.
6To turn off the power, press the POWER OFF button on the remote control or the POWER button on the rear panel.
7Press the POWER switch on the front panel to the OFF position (V) to turn off the main power of the projector.
8Last, turn off the connected equipment power.
Front panel
3 6
POWER
ON OFF
OPERATE
PICTURE
MUTE
SOUND
MUTE
1 ABC 2 DEF 3 GHI
4 JKL 5 MNO 6 PQR
7 STU 8 VWX 9 YZ /
10 ,.
R
B
ENDCTL
DISPLAY
STATIC
NORMAL ENTER
CAPTION
4
User remote control
Projector
ACAT OUT R/Cr G/Y B/Cb H/HV V S-VIDEO VIDEO OPTION REMOTE1 REMOTE2
OUT IN
INPUT SELECT ENTERON/OFFINDICATOR
I
INPUT SELECT POWER
Rear panel