28
Closed Caption Mode Selection
Several closed caption modes can be set for text to be superimposed
on the projection screen.
To select and set a mode, proceed as follows:
1Press the OPERATE button.
•The “OPERATE” menu is displayed.
2Use the CURSOR or button to highlight the “7/CLOSED
CAPTION” item and then press ENTER to display the
“CLOSED CAPTION” menu. You can also select the “CLOSED
CAPTION” menu directly by pressing the INPUT “7” button.
•You can also select the CLOSED CAPTION menu by pressing
the CAPTION button on the remote control.
3Use the CURSOR or button to select a mode, then press
ENTER.
•The mode selection is executed.
Items to select
• CAPTION 1–4 ...... Text is superimposed
• TEXT 1–4............. Text is displayed in full screen
• OFF...................... This exits the CLOSED CAPTION mode
NOTE:
1) The closed caption feature will only work with an NTSC3.58
source.
2) Pressing ENTER executes store function. Switching to
source other than NTSC3.58 will cancel this setting. To
activate, select the NTSC3.58 source again.
4To return to the operate menu, press the END button.
•Wherever the END button is pressed, the screen changes in this
order:
“OPERATE”menu → source screen
– OPERATE –
1 / PICTURE
2 / POSITION
3 / SOUND
4 / INPUT SELECT
5 / SOURCE INFO
6 / STATIC
7 / CLOSED CAPTION
8 / TIMER
CLOSED CAPTION
CAPTION1
CAPTION2
CAPTION3
CAPTION4
TEXT1
TEXT2
TEXT3
TEXT4
OFF
BASIC OPERATION