26
Source Information
This is for viewing the signal information and the current status of
various settings.
Proceed as follows:
1Press the OPERATE button.
•The “OPERATE” menu is displayed.
2Use the CURSOR or button to highlight the “5/SOURCE
INFO” line and press ENTER to display the “SOURCE INFOR-
MATION” screen. You can also select the “SOURCE INFOR-
MATION” screen directly by pressing the INPUT “5” button.
3Press the CURSOR or button to select the page.
4To end the “SOURCE INFORMATION” screen, press the END
button.
•Whenever the END button is pressed, the screen changes in this
order:
“OPERATE” menu → Source screen
NOTE: The items below cannot be set in the OPERATE mode.
– OPERATE –
1 / PICTURE
2 / POSITION
3 / SOUND
4 / INPUT SELECT
5 / SOURCE INFO
6 / STATIC
7 / CLOSED CAPTION
8 / TIMER
P02/03 SOURCE INFORMATION
SYNC CONTROL AUTO
COMP.
COUNTER ✻✻✻✻✻
DISPLAY T I M E ✻✻✻✻:✻✻
S O U R C E L O C K O FF
AKB OFF
G-Y MATRIX
P03/03 SOURCE INFORMATION
POSITION WIDE
FONT NORMAL
APERTURE MANUAL
LEVEL1
SYNC TERMINATION 75Ω
AFC NORMAL
§ ©
P01/03 SOURCE INFORMATION
NAME ✻✻✻✻✻✻✻✻
INPUT TERMINAL INPUT A
INPUT SOURCE RGB
VIDEO MODE RGB
FREQUENCY FH=✻✻✻.✻✻kHz
FV=✻✻.✻✻Hz
SYNC POLARITY HD(–) VD(+)
§ ©
§ ©
BASIC OPERATION