9
PART NAMES AND FUNCTIONS
Battery installation and replacement
User remote control (RC-6320)
1Press down on the battery compartment cover and slide
the cover in the direction of the arrow.
2Install the two new batteries, making sure that their
polarity matches the , . diagrams inside the battery
compartment. Incorrect polarity could damage the unit.
3Close the battery compartment cover.
NOTE: The remote control is powered by two alkaline 1.5V
AA batteries.
Remote control cautions
Use the remote control within a distance of about 7m (23 ft.) and at 30 degrees angle left and right.
Handling remote control and batteries
•Do not drop or mishandle the remote.
•Do not get the remote wet. If the remote gets wet, wipe it dry immediately.
•Avoid heat and humidity.
•When not using the remote for a long period, remove the batteries.
•Do not use new and old batteries together, or use different types together.
•Do not take apart the batteries, heat them, or throw them into a fire.