37
SPECIFICATIONS.rojection type................. Refraction type
Projector and screen are separated
Projection system.......... 3 lens and 3 CRTs in-line
Scanning frequency....... (XG-1352/XG-1352G)
H 15 to 135 kHz/V 40 to 160Hz
(XG-852/XG-852G)
H 15 to 85 kHz/V 40 to 160Hz
Retrace time .................. H 6.0 µS (fH 15 to 30kHz)
H 2.6 µS (fH 30 to 77kHz)
H 2.0 µS (fH 77 to 120kHz)
H 1.4 µS (fH 120 to 135kHz)
V 270 µS
Video bandwidth............ 150MHz (-3dB) XG-1352/XG-1352G
110MHz (-3dB) XG-852/XG-852G
CRT ............................... 8 inch liquid cooled
Deflection angle 90 degrees
Lens .............................. Hybrid lens with ECP and ARC , F1.1
HD-134: XG-1352/XG-1352G
HD-144N: XG-852/XG-852G
(ECP: Enhanced Color Purity except B-lens/ARC:
Anti-Reflective Coating)
Picture size ....................60 to 300 inches diagonal
Resolution ..................... 1500TV lines at center (HDTV)
1350TV line at corner (HDTV)
Pixel resolution.............. 250022000 dots (Addressable)
(XG-852/XG-852G: 160021200 dots )
Light output................... 240 ANSI lumens (XG-1352/XG-1352G, 230 ANSI
lumens (XG-852/XG-852G)
High voltage .................. 32kV
Input.............................. RGB signal 0.7Vp-p 75 ohm positive (BNC)
H/V sync 0.7 to 4.0Vp-p 75 ohm/High Z negative
or positive (BNC)
COMP sync 0.7 to 4.0Vp-p 75 ohm/High Z
negative or positive (BNC)
Sync on G 0.3 to 0.6Vp-p 75 ohm negative (BNC)
COMP Video 1.0Vp-p 75 ohm positive (BNC)
S-video: Y 1.0Vp-p 75 ohm positive
C 0.28Vp-p 75 ohm (burst level)
COMPONENT; 1.0Vp-p 75ohm negative (BNC)
Cr,Cb 0.7Vp-p 75ohm (BNC)
Video system NTSC, PAL, SECAM and NTSC4.43
Convergence.................. Digital convergence (Pre-set 100 positions)
Quick copy convergence
Static and wave convergence
Point convergence, Zone convergence
Convergence limits ........Less than 0.2% of V-height
Warm up time................ 20 minutes
Setup signal................... Cross hairs, Cross hatch, Dot, Window Pattern, H
test pattern
Power supply................. AC 120V 60Hz (XG-1352/XG-852)
AC 220-240V 50Hz (XG-1352G/XG-852G)
Power consumption ...... 750W (XG-1352), 690W (XG-852)
730W(XG-1352G), 660W (XG-852)
Input current ................. 6.7A (AC 120V)XG-1352
6.2A (AC 120V)XG-852
3.4A (AC 220-240V)XG-1352G
3.1A (AC 220-240V)XG-852G
Safety and regulation XG-1352/XG-852;
Meets FCC class A requirements
UL Approved (UL 1950, CSA 950)
DHHS Approved
Meets DOC (Canada)
Meets RED ACT
XG-1352G/XG-852G;
Meets EMC Directive (EN55022,EN61000-3-2,
EN61000-3-3, EN50082-1)
Meets Low Voltage Directive (EN60950, TÜV
GS Approved)
PTB Approved
Cabinet dimensions ....... 610(W)X812(D)X325(H) mm
24.02(W)X31.97(D)X12.80(H) inch
Weight........................... 63.0 kg/139.0 lbs(XG-852/XG-852G)
67.4 kg/148.7 lbs (XG-1352/XG-1352G)
Remote control.............. Wired application
Wireless (operating distance 7m/23ft.)
Remote control functions
..... User remote (RC-6320); Power ON/OFF, Input
signal select, Picture mute, Bright, Contrast, Color
1), Sharpness 1), Tint 2), Volume 3), Sound mute 3),
Source information, Static convergence, Normal-
ize, Enter, End, Closed Caption
Full function remote (RC-6321); Test, Display, Help,
Information, Input list, Static focus, Edge focus, H/
V position, White balance select, Static conver-
gence, Wave convergence, Point convergence, H/V
amplitude, H/V linearity, H/V key-stone, H/V pin-
cushion, H/V blanking, Tilt, Skew, H/V bow, Store,
Normalize, Enter, End
Main control function .... Power ON/OFF, Input signal select,
External control ............. Power ON/OFF, Input signal select, Picture mute,
Sound mute3), Remote control data input
PC control ..................... Acceptable
Supplied accessories..... Full function remote control unit (RC-6321), User
remote control unit (RC-6320), Remote cable
16m/52ft., AC line cable, Terminal cover,
Operation manual, Set-Up manual*, Installation
manual*
Environment.................. Temperature 0 to 40 degrees C
Humidity 0 to 90% non-condensing
Storage -10 to 50 degrees C
Sound emission............. XG-1352/XG-852 less than 45dB
XG-1352G/XG-852G less than 70dB (A). Complies
with ISO 3744 or ISO 7779