JVC CA-MXDVA5 manual Using Sleep Timer, Timer Priority

4 Set the on-time you want the unit		PRESET
to turn on.
1)	Press 4or ¢ to set the hour, then
	press SET.
2)	Press 4or ¢ to set the minute,
	then press SET.
	“OFF TIME” appears for 2 seconds, then	SET
	the unit enters off-time setting mode.
5 Set the off-time you want the		PRESET
unit to turn off (on standby).

1)Press 4or ¢ to set the hour, then press SET.

2)Press 4or ¢ to set the minute, then press SET.

The unit enters preset station selecting	SET
mode.

6 Select a preset station.

PRESET

1) Press 4or ¢ to select the band (“TUNER FM” or “TUNER AM”), then press SET.

2)Press 4or ¢ to select a preset channel number, then press SET.

The REC (recording timer) indicator stops

English

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.

You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time length passes.

On the remote control ONLY:

1 Press SLEEP.

The time length until the shut-off time appears and the SLEEP indicator starts flashing on the display.

•Each time you press the button, the time length changes as follows:

SLEEP10 SLEEP20 SLEEP30 SLEEP60

OFF SLEEP120 SLEEP90

(Canceled)

2 Wait for about 5 seconds after specifying the time length.

The SLEEP indicator stops flashing and remains lit.

To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 5 seconds.

flashing and remains lit. The settings you have done are shown on the display in sequence for your confirmation.

SET

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

7 Press STANDBY/ON to	STANDBY
turn off the unit (on standby) if	STANDBY/ON
necessary.

If you want to listen to another source while recording

Press REC START/STOP or 7 to stop recording. Without stopping it, you cannot change the source.

To turn on or off Recording Timer after its setting is done

1	Press CLOCK/TIMER repeatedly until	/ TIMER
		CLOCK
	“REC” appears on the display.
2	To turn off the Recording Timer, press
	CANCEL.	CANCEL

/DEMO

The REC (recording timer) indicator goes off from the display (“OFF” appears for a while).

The Recording Timer is canceled, but the

setting for the Recording Timer remains in memory.

To turn on the Recording Timer, press SET. SET

The REC (recording timer) indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.

To cancel the setting, press SLEEP repeatedly until “OFF” appears on the display so that the SLEEP indicator goes off from the display.

• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps.

Here are examples.

• Recording Timer has priority over Daily Timer.

If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will not come on at all.

•If Sleep Timer overlaps with another timer (either Daily Timer or Recording Timer), a timer with the earlier shut-off

time has priority.

AM 6:00 6:30 7:00 7:30

Sleep Timer

Recording Timer canceled.

When using the Recording Timer and Sleep Timer at the same time, pay special attention to the shut-off time.

– 44 –