Daewoo DQR-1000D, DQR-1100D owner manual Information is stored in a Timer block

Programming a recording (TIMER)

Programming a recording (with the ShowView System)

Thanks to this programming system, you no longer need to tediously enter the date, programme number, start and end time. All the information needed by the DVD recorder for programming is contained in the ShowView programming number. This ShowView number is found in most TV listings.

Programming a recording (TIMER)

Programming a recording (without the ShowView System)

1	Switch on the TV set. If required, select the programme number for the
	DVD recorder.
2	Press [TIMER] on the remote control. The programming method last

Timer
…
◆√ShowView system	√
† Timer programming
Timer List
To store
Press OK
Timer
ShowView system
ShowView number
- - - - - - - - -

1	Switch on the TV set. If required, select the programme number for the
	DVD recorder.
2	Press [TIMER] on the remote control. The programming method last
	selected is marked.
3	Select ‘ShowView system' using […] or [†] and confirm with [√].
4	Enter the entire ShowView number. This number is up to 9 digits long
	and can be found next to the start time of the TV programme in your TV
	listings magazine.
	e.g.: 5-234-89 or 5 234 89
	Enter 523489 for the ShowView number.
	If you make a mistake, you can clear it with [CLEAR].
5	Confirm with [OK].

Timer

…ShowView system

◆√Timer programming			√
† Timer List
		To store
		Press OK
Timer
Timer Programming
		VPS	Rec
Date Prog. Start PDC End			Mode
	EXT1 22:26	00:26	SP
01
Mo•Fr/Weekly		To store
Press SELECT		Press OK

	selected is marked.
3	Select ‘Timer Programming' using […] or [†] and confirm with [√]. The
	current information will appear on the screen.
4	Select the input field with [œ] or [√].
5	Enter information with […] or [†] or with the number buttons [0..9].
6	If all the information is correct, press [OK]. The programming
	information is stored in a TIMER block.
7	To end, press [TIMER].
8	Load a DVD (unprotected) ready for recording.
	The current disc is checked.

Mo•Fr/Weekly	To store
Press SELECT	Press OK

6 The decoded information appears after confirmation. You can go back at

any time to change the information. Select the appropriate input field

using [œ] or [√]. If required, change the information using […], [†] or

the number buttons [0..9].

9Switch off with [STANDBY].

The programmed recording will only function properly if the DVD recorder has been switched off using the [STANDBY] button.

If any of the TIMER blocks are in use, ' ' will light up on the display.

7 If all the information is correct, press the [OK] button. The programming

information is stored in a TIMER block.

Selecting daily/weekly recordings

RECORDING

8	To end, press [TIMER].
9	Load a DVD (unprotected) ready for recording.
	The current disc is checked.
10	Switch off with [STANDBY].
	The programmed recording will only function properly if the DVD
	recorder has been switched off using the [STANDBY] button.
	If any of the TIMER blocks are in use, '	' will light up on the display.

In 'Date' use [SELECT] to select from the following options: 'Mo-Fr' : Repeated daily recordings from Monday to Friday

'Mo' : Repeated weekly recordings (every week on the same day, e.g. Monday).

Programme numbers of scart sockets 'EXT1’ and 'EXT2'

You can also programme recordings from external sources via scart socket EURO AV1 or EURO AV2.

Switching on 'VPS/PDC' in the 'Start' input field

Select the 'Start’ input field using [TIMER]. Using [SELECT] switch on 'VPS/PDC’ (lights up). If you press [SELECT] again, you will switch 'VPS/PDC' off (disappears).

Changing the recording quality in the 'End' input field

Select the 'End’ input field using [TIMER].

Using [SELECT] , select the recording mode, ‘HQ, SP , LP , EP , EP+'.

48 49