Daewoo DQR-1000D, DQR-1100D owner manual Connecting your DVD recorder to the TV set

Connecting your DVD recorder to the TV set

Connecting your DVD recorder to the TV set

The necessary cable connections must be made before you can record or playback TV programmes using your DVD recorder. Connect the DVD recorder directly to your TV set. If there is a video recorder in between, the picture quality may be poor because of the copy protection system built into the DVD recorder. We recommend that you use a scart cable to connect your TV set and DVD recorder.

When you install your DVD recorder for the first time, select one of the following options:

Option1: Connecting with a scart cable

1Switch off your TV set. Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the back of the DVD recorder.

2Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.

3Plug a scart cable into the scart socket EURO AV1 at the back of the DVD recorder and the corresponding scart socket at the back of the TV set .

4Switch on the TV set. Insert one end of the supplied mains cable into the mains socket at the back of the DVD recorder and the other end into the wall socket.

4	1	3
		2

		4
5	1	3
	2	INSTALLATION

Option3: Connecting with video (CVBS) cable

1Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the back of the DVD recorder.

2Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.

3Insert one end of the supplied video (CVBS) cable into the yellow Phono socket VIDEO (CVBS) at the back of the DVD recorder and the other end into the video input socket (usually yellow) on the TV set.

4Insert one end of the supplied audio (Phono) cable into the white/red Phono socket AUDIO L/R at the back of the DVD recorder and the other end into the audio input socket (usually white/red) on the TV set.

5Switch on the TV set. Insert one end of the supplied mains cable into the mains socket MAINS at the back of the DVD recorder and the other end into the wall socket.

3, 4

Option2: Connecting with an S-Video (Y/C) cable

5 1

1Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the back of the DVD

recorder.

2 Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.

3Insert one end of a S-Video (SVHS) cable into the S-VIDEO OUT (Y/C) socket at the back of the DVD recorder

4	and the other end into the S-Video (SVHS) input socket on the TV set.	2
	Insert one end of the supplied audio (Phono) cable into the white/red Phono socket AUDIO L/R at the back of

the DVD recorder and the other end into the audio input socket (usually white/red) on the TV set.

5Switch on the TV set. Insert one end of the supplied mains cable into the mains socket MAINS at the back of the DVD recorder and the other end into the wall socket.

12 13