Installing your DVD recorder
Automatic TV channel search (Autoinstall)
During installation, all available TV channels are searched for and stored. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving house, you can start this procedure again. This will replace the stored TV channels with the new ones.
Installing your DVD recorder
Manual TV channel search
In some cases, not all of the available TV channels may have been found and stored during initial installation. In this case, you will need to search for and store the missing or coded TV channels manually.
Installation |
|
… |
|
◆√Autom. search | √ |
†Manual search Sort TV channels Time/Date
To exit press
SYSTEM MENU
1Switch on the TV set. If required, select the programme number for the DVD recorder.
2Switch on the DVD recorder using [STANDBY].
3Press [SYSTEM MENU] on the remote control. The menu bar appears.
4Select ' 
' using […] or [†].
5Select 'Installation' using [√] and confirm with [†].
6Select 'Autom. search' using […] or [†] and confirm with [√].
7'Autom. search' starts. Wait until all TV channels have been found. This can take several minutes.
8When Autoinstall is completed, 'Autoinstall complete' will appear on the TV screen.
9Date and time have been set and saved.
10To end, press [SYSTEM MENU] .
Follow TV
When the TV set supports Easylink then the DVD recorder tries to get the channel informations which are stored in th TV set.
Installation |
|
|
… Autom. search |
|
|
◆√Manual search |
| √ |
† Sort TV channels |
|
|
Time/Date |
|
|
To exit press |
| |
SYSTEM MENU | ||
Installation |
|
|
Manual search |
|
|
… |
|
|
◆ Channel/freq. œ CH | √ | |
† Entry/search | 14 |
|
Programme number | 01 |
|
TV channel name | Off |
|
Decoder |
| |
NICAM | On |
|
Fine tuning | 0 |
|
To exit press
SYSTEM MENU
1Switch on the TV set. If required, select the programme number for the DVD recorder.
2Switch on the DVD recorder using [STANDBY].
3Press [SYSTEM MENU] on the remote control. The menu bar appears.
4Select ' 
' using […] or [†].
5Select 'Installation' using [œ] or [√] and confirm with [†].
6Select 'Manual search' using […] or [†] and confirm with [√].
7In 'channel/freq.', select the desired display using [√].
8In 'Entry/search', enter the frequency or channel of the TV station using the number buttons [0..9].
9Using [œ] or [√] in 'Program number ', select the programme number you want to use for the TV channel, e.g. “01''.
10Press [OK] to store the TV channel.
11To search for other TV channels, begin again at step 8.
12To end, press [SYSTEM MENU].
INSTALLATION
18 |
|
|
| 19 |
|
|
