JVC CA-MXDVA5 manual Setting the Screen Messages Setting the Brightness

English

Setting the Screen Messages Setting the Brightness

During disc operation, it is recommended to set this function to “ON” so that you can confirm what you are doing on the TV screen.

To go back to the previous screen during the procedure, press RETURN.

Using this function, you can change the brightness of the on- screen display.

To go back to the previous screen during the procedure, press RETURN.

1 Press SETUP.

Setup menu appears on the TV screen.

2 Press Cursor °(or 5) to select (highlight) “7 DISPLAY OPTIONS,” then press

ENTER.

Display Options menu appears. (“1 TV ASPECT” must be selected – highlighted.)

3 Press Cursor °(or 5) to select (highlight) “4 SCREEN MESSAGE,” then press

ENTER.

	DISPLAY OPTIONS
1 TV ASPECT	4:3 PS
2 ANGLE MARK	ON
3 STILL MODE	AUTO
4 SCREEN MESSAGE	ON
5 BLACK LEVEL	OFF
RETURN	ENTER
SCREEN MESSAGES
1 ON
2 OFF
RETURN	ENTER

4 Press Cursor °(or 5) to select (highlight) a desired setting, then press ENTER.

•1 ON: Select this to show the on-screen indications on the TV screen.

•2 OFF: Select this not to show the on-screen indications.

To erase the Setup menu, press RETURN repeatedly until the Setup menu disappears.

1 Press SETUP.

Setup menu appears on the TV screen.

2 Press Cursor ° (or 5) to select (highlight) “7 DISPLAY OPTIONS,” then press

ENTER.

Display Options menu appears. (“1 TV ASPECT” must be selected – highlighted.)

3 Press Cursor ° (or 5) to select (highlight) “5 BLACK LEVEL,” then press ENTER.

	DISPLAY OPTIONS
1 TV ASPECT	4:3 PS
2 ANGLE MARK	ON
3 STILL MODE	AUTO
4 SCREEN MESSAGE	ON
5 BLACK LEVEL	ON
RETURN	ENTER
	BLACK LEVEL
1 ON
2 OFF
RETURN	ENTER

4 Press Cursor ° (or 5) to select (highlight) a desired setting, then press ENTER.

•1 ON: Select this to darken the on-screen display.

•2 OFF: Select this to brighten the on-screen display.

To erase the Setup menu, press RETURN repeatedly until the Setup menu disappears.

– 35 –