JVC CA-MXDVA5 manual Recording a Tape on Deck B, To record on both sides Reverse Mode

English

Recording

IMPORTANT:

•It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

•The recording level is automatically set correctly, so it is not affected by the VOLUME control, the SOUND MODE control, and the SUBWOOFER LEVEL control. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.

•If recordings you have made have excessive noise or static, the unit may be too close to a TV. Place the unit away from the TV.

•You can use type I tape for recording.

To protect your recording Cassettes have two small tabs on the back to protect

unexpected erasure or re- recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

To keep the best recording and playback sound quality

If the heads, capstans, and pinch rollers of the cassette decks become dirty, the following will occur:

•Impaired sound quality

•Discontinuous sound

•Fading

•Incomplete erasure

•Difficulty in recording

To clean the heads, capstans, and pinch rollers

Use a cotton swab moistened with alcohol.

Pinch rollers

Capstans

Heads

Recording a Tape on Deck B

On the unit ONLY:

1 Press EJECT 0 for the deck B.

2 Put a recordable cassette in with the exposed part of the tape down.

3 Close the cassette holder gently.

4 Check the tape direction of deck B.

•If the tape direction is not correct, press TAPE 2 3 twice then 7to change the tape direction.

5 Start playing the source — FM, AM, DVD player or auxiliary equipment connected to AUX IN jacks.

•When you want to use the dubbing method, see “Dubbing Tapes” on page 38.

•When the source is CD, you can also use CD Synchro Recording (see “CD Synchronized Recording” on page 38.)

6 Press REC START/STOP.	/STOP REC
	REC START CD

The REC (recording) indicator lights up on the display and recording starts.

To stop during recording, press REC START/STOP again or 7.

To remove the cassette, press EJECT 0for deck B.

To demagnetize the heads

Turn off the unit, and use a head demagnetizer (available at electronics and audio shops).

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse

Mode indicator lights up as —

•When using the Reverse Mode for recording, start recording in the forward (3) direction first. Otherwise, recording will stop when recording is done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as —

– 37 –