JVC CA-MXJ150R 7, Connecting Speakers, 2Insert the end of the speaker cord into the, terminal

English

AM (MW/LW) antenna

AM ANT

AM (MW/LW) loop antenna (supplied)

1Connect the AM (MW/LW) loop antenna to the AM ANT terminal as illustrated.

2Turn the AM (MW/LW) loop antenna until you have the best reception.

For better reception of both FM and AM (MW/LW)

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

Connecting Speakers

You can connect a pair of the front speakers.

1	2, 3
	SPEAKERS
	IMPEDANCE 6-16 OHMS.
	+
	L
Black	–	Red
Speaker	–	Speaker
	R
cord	+	cord
Right		Left
speaker		speaker

1Press and hold the clamp of the speaker terminal on the rear of the unit.

2Insert the end of the speaker cord into the

terminal.

Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–).

3Release the finger from the clamp.

IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

– 7 –