JVC CA-MXJ150R manual Playing Back CDs, Loading CDs

Playing Back CDs Continued

English

Loading CDs
1	Press OPEN/CLOSE 0 on the	OPEN / CLOSE

Playing Back CDs

You can play CDs continuously.

unit or CD 0on the remote

control.

CD

The unit automatically turns on and the

carousel comes out.

2 Place one or two discs correctly on

the front slots of the carousel, with its label side up.

1 Load CDs.

2 Press REPEAT on the unit (or REPEAT on the remote control) to select a play mode you want.

Each time you press the button, play modes change as follows:

REPEAT

REPEAT

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3	If you wish to load a third disc,	DISC CHANGE
	press DISC CHANGE on the unit
	(or DISC SKIP on the remote	DISC SKIP
	control).
	The carousel rotates by 120˚.

ALL CD 1 CD REPEAT 1

REPEAT ALL CD REPEAT 1CD

ALL CD: Plays all loaded CD. (When you turned on the unit, “ALL CD” is automatically selected.)

1CD:Plays back one CD.

REPEAT 1: Repeats one track on one CD.

REPEAT 1CD*: Repeats all the tracks on one CD.

REPEAT ALL CD: Repeats all the tracks on all the CDs, or all the tracks in the program.

*REPEAT 1CD is not used for Program play.

3 Select the disc you want to CD1 CD2 CD3

4 Press OPEN/CLOSE 0 on the OPEN / CLOSE

unit or CD 0on the remote
control again.
The carousel closes, and the corresponding	CD

start play from. On the unit :

Press one of the disc number buttons (CD 1, CD 2, and CD 3). On the remote control :

Press DISC SKIP repeatedly.

DISC SKIP

disc number indicator (disc 1 to disc 3) lights

up on the display.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

CD play starts from the first track of the selected disc.

Disc No.	2
flashes	1

	VOL
Track number	Elapsed playing time

2

1	3
Disc number		Disc indicator

•The disc indicator flashes while the corresponding CD is currently selected.

•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.

•Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the trays.

To stop during play, press 7.

To stop play for a moment

Press CD 6.

CD

2 1

VOL

“PAUSE” appears on the display.

To resume play, press CD 6again.

To remove the disc, press OPEN/CLOSE 0on the unit or CD 0on the remote control.

– 14 –