JVC CA-MXJ150R manual Using Sleep Timer, Select the preset station

7 Select the preset station.

1)Press 4or ¢ to select the band (“FM,” “MW,” or “LW”), then press

PROGRAM/SET.

2)Press 4or ¢ to select a preset channel number.

PROGRAM/SET

8 Press PROGRAM/SET.

The indicator stops flashing and PROGRAM/SET

remains lit.

If you have set the Recording Timer with the unit turned on, turn off the unit.

The REC indicator lights up when the unit is turned off (on standby).

To select Recording or Daily Timer after its setting has been done

Press TIMER ON/OFF on the remote TIMER

ON/OFF

control.

Each time you press the button, the timer mode changes as follows:

TIMER REC

OFF TIM+REC

TIMER: Select this when you want to use only the Daily Timer.

REC: Select this when you want to use only the Recording Timer.

TIM+REC: Select this when you want to use both the Daily Timer and the Recording Timer.

OFF: Select this when you do not want to use the timer.

•When the timer is set to OFF, the indicator and/or REC indicator goes off from the display.

Even if the Recording or Daily Timer is canceled, but the setting condition for the Recording or Daily Timer remains in memory.

•When any timer setting is activated, the indicator and/or REC indicator lights up again.

If the unit is operating when the timer-on time comes

Recording or Daily Timer does not work.

English

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.

You can set Sleep Timer when the unit is operating.

How Sleep Timer actually works

The unit automatically turns off after the specified time length passes by.

On the remote control ONLY:
1 Press SLEEP.	SLEEP

The time length until the shut-off time appears and the SLEEP indicator lights up on the display.

•Each time you press the button, the time length changes as follows:

90 MIN 60 MIN 45 MIN

OFF 15 MIN 30 MIN (Canceled)

2 Wait for about 5 seconds after specifying the time length.

The SLEEP indicator remains lit.

To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 3 seconds.

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly so that the SLEEP indicator goes off.

• Sleep Timer is also canceled when you turn off the unit.

– 20 –