Continued
• Current disc information
1
1 / 2 | 1 / 2 | 1 / 5 |
| ENGLISH | ENGLISH |
2 | 3 | 4 |
1: Current disc information
2: Total number of
3 : Total number of audio languages
4 : Total number of subtitles
• Disc playing information
TITLE 3 CHAP. 2 TIME 1:33:33 BITRATE 3.3 Mbps | ||
1 2 | 3 | 4 |
1: Current title number
2 : Current chapter number
3 : Elapsed playing time of the current title
4 : Transmission rate
To increase the DVD’s sound level
The DVD’s audio sound is recorded at a lower level than for other discs such as VCDs or Audio CDs.
If you feel the sound is not strong enough to listen to when playing back a DVD, you can increase the sound level of DVD playback in advance.
•Once you adjust this setting, it is effective every time you play back a DVD.
•This setting does not effect any discs other than DVDs.
•The audio output level through the DVD OPTICAL DIGITAL OUT terminal does not change if you change the DVD sound level.
On the remote control ONLY:
To increase the sound level of DVD playback, press DVD LEVEL while holding down SHIFT.
•Each time you press the buttons, the sound level changes as follows:
NORMAL 
MIDDLE 
HIGH
The selected level appears on the display.
VD V D
Ex.: When “MIDDLE” is selected.
SVCD/VCD/Audio CD Basic Operations
Available for: SVCD | VCD | Audion uioCDCD |
•To play back a DVD, see page 29.
•To play back an MP3 disc, see page 32.
•While playing a SVCD or VCD with the PBC function, the playback will stop when a disc menu appears. If a menu appears while playing a SVCD or VCD with PBC function, see “Playing Back by Using the Disc Menu” on page 34.
1 Load a disc.
2 Press DVD #/8 on the main unit (or DVD SELECT 3 on the remote control).
After reading the disc contents, playback starts from the first track.
•The disc playing information appears on the display.
Current track No.
V C D
Current disc type* Elapsed playing time
Ex.: When a VCD is played without the PBC function.
*About the indication of current disc type
–“VCD”: shows a SVCD or VCD is loaded.
–“CD”: shows an Audio CD is loaded.
•While playing a SVCD or VCD with the PBC function, “PBC” rather than the current track number appears in the main display and the PBC indicator lights up. (About the PBC function, see pages 34 and 35.)
PBC indicator
V C D
PBC
Ex.: When a VCD is played with the PBC function.
•When you purchased this unit, the DVD sound level is set to “MIDDLE.”
30
