JVC CA-UXA7DVD You can also use the source selecting buttons, To turn on the Daily Timer again

3 Select the source to play back.

1)Press ¢ or 4 repeatedly to select the source.

•Each time you press the button, the source changes as follows:

FM AM DVD/CD

AUX/MD TAPE

•You can also use the source selecting buttons.

•When you select “DVD/CD” or “TAPE,” prepare it for playing back.

•When you select “FM” or “AM,” press SET, then select a preset number by pressing ¢ or 4.

•When you select “AUX/MD,” set the timer function of the external component as well.

2)Press SET.

The hour digit of the timer-on time starts flashing.

4 Set the timer-on time.

1)Press ¢ or 4repeatedly to adjust the hour. You can adjust the hour using the number buttons.

2)Press SET.

The minute digit starts flashing.

3)Press ¢ or 4 repeatedly to adjust the minute. You can adjust the minute using the number buttons.

Ex.: When you set timer-on time to 7:00.

4)Press SET.

The hour digit of the timer-off time starts flashing.

5 Set the timer-off time.

1)Press ¢ or 4repeatedly to adjust the hour. You can adjust the hour using the number buttons.

2)Press SET.

The minute digit starts flashing.

3)Press ¢ or 4 repeatedly to adjust the minute. You can adjust the minute using the number buttons.

Ex.: When you set timer-off time to 8:00.

4)Press SET.

The volume setting appears in the main display.

6 Adjust the volume level.

1)Press ¢ or 4 repeatedly to adjust the volume level.

•You can adjust the volume level to “– –” or within the range of 0 (silent) to 40 (maximum).

•When you select “VOLUME – –,” the volume is set to the current volume level.

2)Press SET.

The DAILY indicator stops flashing and remains lit. The contents of this setting appear in the main display for your confirmation.

7 Press STANDBY/ON (or on the main unit) to turn off the unit if necessary.

If the unit is already turned on when the timer-on time comes

The Daily Timer has no affect at all.

About 20 seconds before the timer-on time, the DAILY indicator and “DAILY TIMER STANDBY” start flashing on the display.

To turn off the Daily Timer after its setting is done

1Press CLOCK/TIMER repeatedly until “DAILY TIMER” appears in the main display.

2Press CANCEL.

The timer ( ) and DAILY indicators go off from the display.

To turn on the Daily Timer again

1Press CLOCK/TIMER repeatedly until “DAILY TIMER” appears in the main display.

2Press SET repeatedly until the settings are shown in the

main display for your confirmation.

The timer ( ) and DAILY indicators light up on the display.

The Daily Timer will be canceled and the unit will not turn off automatically in the following cases:

•When you change the source.

•When you turn off the Daily Timer.

63