JVC UX-A7DVD Using AV COMPU LINK Control System, AV COMPU LINK Connection, One-touchDVD play

Using AV COMPU LINK Control System

The AV COMPU LINK control system allows you to use JVC’s TV with simple operations.

To use AV COMPU LINK control system, you need to connect this unit and a TV through the AV COMPU LINK terminals.

AV COMPU LINK Connection

Connect JVC video components with AV COMPU LINK jack by using a cord with monaural mini-plugs (not supplied).

•You need to set “AV COMPULINK MODE” in the SYSTEM menu correctly to use AV COMPU LINK control system. (See page 58.)

•Refer also to the manual supplied with your TV.

AV

Cord with monaural mini-plugs (not supplied)

COMPU

LINK

To AV COMPU LINK jack

The unit TV

Set “AV COMPULINK MODE” in the SYSTEM menu as follows.

•Select “DVD 1” (initial setting) when connecting to the VIDEO-3 (DVD) input jack of the TV.

•Select “DVD 2” when connecting to the VIDEO-1 input jack of the TV.

•Select “DVD 3” when connecting to the VIDEO-2 input jack of the TV.

You can connect a JVC video component that has AV COMPU LINK II, AV COMPU LINK III, or AV COMPU LINK EX jack can be connected to this unit.

One-touch DVD play

Simply by starting playback on the unit, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

• The TV does not automatically turn off even if you turn off the unit.

When the main power of the TV is off or the power cord of the TV is unplugged, you cannot use the one-touch play.

65