JVC UX-A7DVD, CA-UXA7DVD, SP-UXA7DVD Selecting the Sources and Starting Play, Adjusting the Volume

Selecting the Sources and Starting Play

To select the tuner as the source, press FM/AM. The unit automatically turns on (when the unit is in standby), and the last selected band appears in the main display.

•Each time you press the button, the band alternates between FM and AM.

•For more detailed operations, see pages 24 to 26.

To select the DVD player as the source, press DVD SELECT 3 (or DVD #¥8 on the main unit).

The unit automatically turns on (when the unit is in standby), and “READING” appears in the main display for a while.

•Play will start if a disc is in the disc tray.

•“NO DISC” will appear in the main display if a disc is

not loaded.

To stop playback, press 7.

•For more detailed operations, see pages 27 to 39, 42 to 48.

To select the tape as the source, press TAPE 2 3. The unit automatically turns on (when the unit is in standby), and “TAPE” appears in the main display.

•Play will start if a tape is in the cassette holder. To stop playback, press 7.

•For more detailed operations, see pages 40 and 41.

To listen to the sound from external equipment, press

AUX/MD.

The unit automatically turns on (when the unit is in standby), and “AUX/MD” appears in the main display.

•For operating external equipment, see its manual also.

Adjusting the Volume

You can adjust the volume level only while the unit is turned on.

•The volume level has no effect on recording.

On the remote control:

To increase the volume, press VOLUME +. To decrease the volume, press VOLUME –.

•When you press and hold each button, you can change the volume level continuously.

On the main unit:

To increase the volume, turn VOLUME + / – control

clockwise.

To decrease the volume, turn VOLUME + / – control counterclockwise.

•You can adjust the volume level within the range of 0 (silent) to 40 (maximum).

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

DO NOT turn off (on standby) the unit with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is in standby mode.

When changing from another source to “AUX/MD”

If the sound from the component connected to the AUX/MD jacks is too loud or is not loud enough (without changing the volume level), you can change the audio input level through the AUX/MD jacks. (See page 23.)

To turn down the volume level temporarily

On the remote control ONLY:

Press FADE MUTING.

The volume level gradually decreases to “VOLUME 0.”

To restore the sound, press FADE MUTING again.

•Turning VOLUME + / – control clockwise (to +) on the unit or pressing VOLUME + on the remote control also restores the sound.

20