To connect analog audio equipment
By using an RCA pin plug cord (not supplied), you can connect equipment with analog audio output jacks such as an MD player, a TV, etc.
•Be sure that the plugs of the audio cords and the jacks on the rear of the unit are
White plugs and jacks are for left audio signals, and red ones for right audio signals.
|
| MD player, TV, etc. | |
To analog audio output |
| ||
|
| Left | Right |
AUDIO |
| RCA pin plug | |
DVD OPTICAL PCM/ |
| cord | |
DIGITAL | STREAM |
|
|
OUT |
|
|
|
|
| Right |
|
AUX / MD |
|
|
|
RIGHT | LEFT | Left |
|
|
|
|
To listen to or to record the sound from analog audio equipment connected to the AUX/MD jacks, select “AUX/ MD” as the source to play. (See page 20.)
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit. (See the back cover page.)
DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
VOLTAGE |
SELECTOR |
230V |
110V |
127V |
VOLTAGE |
SELECTOR |
230V |
110V |
127V |
SPEAKE |
12